Dexter 4" Drop E-Z Lube 7,000lb Trailer Axle With 8 on 6-1/2" Lug Pattern

Updated 07/02/2021 | Published 07/01/2021

Products Featured in This Question

Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs

(786)

$580.82

Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7K

(1630)

$374.32

Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud

(304)

$159.44

Dexter Trailer Idler Hub Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 8 on 6-1/2

(72)

$115.09

Kodiak Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Dacromet - 1/2" Bolts - 7,000 lbs

(160)

$584.73

Question:

is this part number 8 lug ? thanks

asked by: Edgar O

Expert Reply:

The Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles # 8327860 does not include any hubs. You can add hubs to make it an 8 on 6-1/2" lug pattern.

The Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ contains the correct bearings, races, grease seal, grease cap and lug nuts for an 8 on 6-1/2" lug pattern with 1/2" studs. To complete the axle and brakes you will need 2 of these hubs with a Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-464-465. This brake kit is self adjusting once installed properly it will automatically adjust as the brake pads wear to ensure better stopping distance and even pad wear across the axle.

The Dexter Trailer Idler Hub Assembly # 8-231-9UC1-EZ is the hub you need if this is not going to be a braking axle or you plan to use a Disc Brake Kit # K2R712DAC. It also includes the correct bearings, races, grease seal, grease cap and lug nuts for the 8 on 6-1/2" lug pattern and 1/2" studs.