Lift Kit For 2007 R-Vision Trail Cruiser TC-24DS With Tandem Lippert 3.5K Square Torsion Axles
Updated 07/11/2020 | Published 07/09/2020
Question:
I recently purchased a 2007 Trail cruiser by r-vision model TC-24ds. When I connected the Rv the goose neck hitch sits to high and the Rv is not level. I’ve already adjusted the receiver to its lowest setting and it is still sitting high. Do you sell a lift kit for this Rv. The Rv has torsion axles. The axles are made by lippert components inc. model LCI35t with rates at 3500. Any help would be greatly appreciated.
asked by: Aaron S
Expert Reply:
Lippert made two types of 3.5K torsion axles, the Square and the Diamond. The difference between the two is the orientation of the axle beam, as shown in the photo I put together for you.
Given the orientation of the axle beam shown in your photo (thanks for the photo, by the way!), I was able to determine you have a Lippert Square axle, which would use the Lippert # LC382741 Square Torsion Axle Lift Kit. The kit will provide 3-1/2 inches of lift. For a tandem axle camper like your Trail Cruiser TC-24ds, you'd need two kits, one for each axle.
The # LC270682 is for the diamond axle.
