Vertical Bunk Board Brackets for a 216 Sea Pro Boat Trailer
Updated 07/10/2020 | Published 07/08/2020 >
Products Featured in This Question
Question:
I am looking for slotted bunk to place 2 2x6x8foot and 2 2X2X12foot BUNK BOARDS vertically. I have a 216inch Sea Pro SV bay boat, approx weight, boat, motor, gas, 2,600 lbs Which brackets would be best for me? I have an aluminum trailer with 3x3inch crossmembers and galvanized brackets that need to be replaced. I want to put 2, 2x6s on the outside and 2 2x8 treated boards in the center for my bunks And I want to mount them vertically with the 2side supported by vertical bunk brackets. And Do you have the stainless U-bolts for a trailer with the x3" crossmembers.? What is my best option for this?
asked by: Dunny G
Expert Reply:
We do have a few different options for vertical bunk board brackets like the 7-1/2" Tall # CE10603G for you to choose from depending on what you're needing. I've linked our selection for you to filter through.
I'm also linking our selection of Stainless Steel U-Bolts that you can filter through. This includes options like the part # CE15503A which measures 4" long x 3-1/8" wide x 7/16" diameter.
Since each boat trailer is a little different it's always best to either get parts that have the same dimensions that you have, or to mock up your trailer so you can see where everything will be sitting.
Product Page this Question was Asked From
CE Smith Light Duty, Vertical Bunk Bracket - Galvanized Steel - 7-1/2" Tall - Qty 1
- Boat Trailer Parts
- Bunks
- Vertical Bunk Bracket
- 7-1/2 Inch Tall
- Galvanized Steel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Determine U-Bolts and Fasteners Needed to Install SE Smith Bunk Boards and Brackets
- Q&A: Vertical Bunk Bracket for Boat Trailer for Converting from Roller to Wood Bunks
- Article: Boat Trailer Guides: Which are the Best?
- Q&A: How Can I Tell If My Trailers Bearings Need To Be Replaced?
- Q&A: Will 2 X 4 Board Work With CE Smith Vertical Bunk Bracket
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Q&A: My New Grease Seal Depth Is Different From The Depth Of The Original Grease Seal, Is This Okay?
- Q&A: Should There Be A Gap Between The Seal and The Inner Bearing In My Hub
- Article: Galvanized vs. Aluminum Trailers
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Troubleshooting 4 and 5-Way Wiring Installations

