Availability of Angle Iron Bolts to Mount CE Smith Vertical Bunk Bracket
Updated 05/12/2020 | Published 05/08/2020
Question:
Looking for two angle iron bolts. Do you have bolts that will work 3x2 galvanized angle iron? If I can get the bolts, also need two vertical pump brackets part number CE10603G. Thank you
asked by: James S
0
Expert Reply:
The only kind of mounting bolts we have for the CE Smith Light Duty, Vertical Bunk Bracket # CE10603G are square since that's what normally comes on boat trailers. The mounting slots are 4-3/8" long x 7/16" wide so if you can source the angle iron bolts elsewhere you'll want to make sure they don't exceed 7/16" diameter.
expert reply by:
Jon G
0
Product Page this Question was Asked From
CE Smith Light Duty, Vertical Bunk Bracket - Galvanized Steel - 7-1/2" Tall - Qty 1
- Boat Trailer Parts
- Bunks
- Vertical Bunk Bracket
- 7-1/2 Inch Tall
- Galvanized Steel
- CE Smith
more information >
Continue Researching
- Q&A: How to Determine U-Bolts and Fasteners Needed to Install SE Smith Bunk Boards and Brackets
- Q&A: Vertical Bunk Bracket for Boat Trailer for Converting from Roller to Wood Bunks
- Article: Boat Trailer Guides: Which are the Best?
- Q&A: How Can I Tell If My Trailers Bearings Need To Be Replaced?
- Q&A: Will 2 X 4 Board Work With CE Smith Vertical Bunk Bracket
- Q&A: Should There Be A Gap Between The Seal and The Inner Bearing In My Hub
- Q&A: My New Grease Seal Depth Is Different From The Depth Of The Original Grease Seal, Is This Okay?
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Article: Galvanized vs. Aluminum Trailers
- Article: How to Measure a Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Troubleshooting 4 and 5-Way Wiring Installations