Is the Westin PRO TRAXX Replacement Installation Hardware 21-5356PK A Fit For Ram 3500 Crew Cab

Question

Question:

will this mounting bracket fit the 3500 ram crew cab with 8foot bed

asked by: Kurt

0

Expert Reply:

The Replacement Installation Hardware for Westin part # 21-5356PK fits 2010 - 2019 Ram 3500 Crew Cab Pickups long or short beds. This installation hardware does replace the hardware for the Westin PRO TRAXX 5" Oval Nerf Bars part # 21-53560 in stainless steel or part # 21-53565 in black powder coat. The hardware will not fit any other nerf bars or running boards so please keep that in mind. If you have another brand or style of Westin nerf bars please let me know and I can see if there is an installation kit available.

expert reply by: Heather A

0

Answer 1

I called the manufacturers to confirm wire sizes. The Optronics lights, Item #STL9RB and Item #MCL76AB, will have 20-18 gauge wires. The Electric Trailer Brake Kit, Item #AKEBRK-35, will have 12-10 gauge wires. I recommend using the Deka Heat Shrink…

view full answer...

Answer 2

Thank you for the picture that is very helpful since I cannot always see what trailer manufacturers used on their trailers. The LED Combination Tail Light Kit #TLL9RK may be your best option depending on the condition of your current wiring. This kit…

view full answer...

Answer 3

Trailer wiring generally uses 16 gauge wire, part #16-1-1. However, with a long trailer like yours you may want to go with a larger like 14 gauge #DW07550-1 or even 12 gauge #12-1-1. Each size is sold by the foot. You will need to have the lights at…

view full answer...

Answer 4

If you want to install a new 4-way connector on your utility trailer I recommend using something like part #A35W42B. This is a 35 ft 4-way wiring harness. I have attached a link to a helpful article that explains trailer wiring you can check out. For…

view full answer...

Answer 5

I would certainly recommend the 1/2-inch wire loom #459075-1. It will hold two jacketed 2 wire 10-gauge wire and three jacketed 2 wire 12-gauge wire. See pictures to the right. In addition, I was able to fit comfortably eleven individual 16-gauge…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Is the Westin PRO TRAXX Replacement Installation Hardware 21-5356PK A Fit For Ram 3500 Crew Cab

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching