How To Change the Oil in the 3,200-Watt Portable RV Inverter Generator
Updated 04/06/2020 | Published 04/05/2020
Products Featured in This Question
Question:
where is the oil drain? Do I need to tip it over to drain oil from the same place that oil is added?
asked by: Mac F
0
Expert Reply:
I have attached for you below the oil change procedure for the 3,200-Watt Portable RV Inverter Generator part # 333-0003 which was pulled direclty from the owner's manual. The owner's manual is attached below for you as well. In order to get all of the old oil out, you do indeed need to tilt the generator on it's side.
While you are at it, I'd also check the air filter as well and replace if needed using part # 333-330723578 and the spark plug part # 333-330723557.
expert reply by:
Conner L
0
click to enlarge
Continue Researching
- Q&A: Testing Wires of Lippert Ground Control to Determine If Issue is With Controller or Touch Pad
- Q&A: How To Test for Bad Controller on Lippert Ground Control 3.0 Electric Leveling System
- Shop: Replacement Spark Plug for etrailer 4,500-Watt Generator and 3,200-Watt Inverter