Finding Wire Colors to Install Pop and Lock # PAL9555 on 2019 Dodge Ram 1500
Updated 02/01/2020 | Published 01/28/2020
Question:
Which wires do I splice to power the PL9555? I am having a hard time finding a wiring diagram for my truck.
asked by: Tee W
0
Expert Reply:
I looked up your truck and the color wires you are looking for are orange/gray or tan/green for the lock wire and lime green or tan/white for the unlock wire.
If you have trouble locating the lock and unlock wires, test all the wires that are inside the rubber boot that runs
between the door and the cab of the truck. Once you locate them you can follow them to a location that makes
tapping to the wires easier.
expert reply by:
Jameson C
0
Continue Researching
- Q&A: Pop & Lock Keyless Entry Entry For UnderCover Tonneau Cover
- Q&A: Does Pop and Lock Power Lock Conversion Kit # PAL9772 Fit Leer 100XR Topper
- Q&A: Replacement Load-N-Lock Power Lock for Hard Tonneau Covers and Truck Caps
- Q&A: Recommended Replacement for Load Lock Truck Cap Lock
Tee W.
2/1/2020
Installation of the PAL9555 on a Dodge Ram 1500:The correct wire for the power unlock is purple w/grey stripe.Correct wire for the power lock is lime green w/dark green stripe.These wires can be found at the B pillar, not at the tailgate.