Distance Between Drop Spindles of Dexter Axle # 8327860
Updated 05/24/2019 | Published 05/22/2019
Question:
Hello, The hub face and spring center measurements will work for my axle replacement but I would like to know the distance between the portion of the axle. Thanks
asked by: Allan T
Expert Reply:
I checked with Dexter and the distance between the drop spindles of the Dexter Axle # 8327860 that you referenced is 82.34 inches.
The overall distance from hub face to hub face (when hubs are installed) will be 95 inches and the distance between the spring seats (where the axle attaches to the suspension) is 79-1/4 inches. The spindle drop is 4 inches and the axle has a 7,000 lb capacity.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 79-1/4 Inch Spring Center
- 95 Inch Hub Face
- Drop - 4 Inch
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs
- Q&A: What is Needed to Upgrade From 3,500 lb to 5,200 lb Axle
- Q&A: Can a Trailer Hitch be Installed on the Back of a Trailer
- Q&A: What Does Hole In Rear Hanger For 2-1/2" Wide Hanger Used For?
- Q&A: Availability of Grease Seal Ring for Seal on 22834 Trailer Hub
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: Replacement Hydraulic Drum Brakes for Dico 15638
- Q&A: Lug Nut Upgrade for Lionshead LR103 Capped 1/2" Lug Nut
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Top Gifts for Dads in 2024