Drive RV Stereo EEDV06 Bluetooth Will Not Pair

Updated 05/20/2019 | Published 05/19/2019

Question:

I am having trouble connecting to the Bluetooth. It says no link and when I try to connect it won’t. It worked the first few trips, but isn’t now. I tried the factory reset and the system never sent me a message inviting me to connect.

asked by: Michelle K

Expert Reply:

The Bluetooth pairing procedure for the Drive RV Stereo EEDV06 is as follows:

Step 1: Press the "Bluetooth" button on the stereo while powered on.

Step 2" On your phone, enable Bluetooth, then go into the settings and select "EEDV06".

Step 3: On your phone, enter "0000" as the pin when prompted.

Step 4: Once the code is entered you should then again be prompted to accept the connection.

Unfortunately, I don't have any additional advice for you outside of the pairing procedures on page 7 of your owner's manual. If the device will still not pair then try to restart your phone but otherwise your only option would be to replace the unit for which I recommend the Jensen RV Stereo part # JWM60A. We see much less issues with the Jensen brand when compared to Drive.

expert reply by: Conner L