Will Go Power Industrial Pure Sine Wave Inverter Work with Freezer that Pulls 1.15 Amps
Updated 05/13/2019 | Published 05/11/2019 >
Question:
Do I need a pure sign wave inverter to power a domestic freezer? It is 5 cubic foot unit in my custom trailer conversion. The freezer uses 1.15 amps at 115 volts when the compresser is running. What size inverter do I need so that it will handle the start up surge. Will your 400 Watt inverter do the job and give me about 60 watts extra for other intermitant loads. I want to size my inverter for the longest possible run time on a 100 AH AGM sealed battery.What the efficiency at 50 load? What is the standby wattage or current used when no loads are applied?
asked by: Steve B
Helpful Expert Reply:
A pure sine wave inverter is going to give you the cleanest AC power for your RV appliances like the freezer you have. It may not be totally necessary for a freezer but overall it will give you the most reliable performance and allow the freezer to last as long as possible.
The Go Power Industrial Pure Sine Wave Inverter # 34282692 that you referenced will have more than enough wattage for your freezer too. Your freezer uses 1.15 amps which in wattage is 138 watts. This is capable of supplying 400 watts running output and 800 watts surge. This would give you more than enough wattage without being overkill so it would be a great choice.
Product Page this Question was Asked From
Go Power Industrial Pure Sine Wave Inverter - GFCI - 400 Watt - 12V
- Power Inverter
- Pure Sine Wave
- Electronics
- 12V
- 400 Watts
- Inverter Only
- AGM/Gel/Lead Acid
- Lithium
- Outlet
- RV
- Go Power
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Inverter Replacement for 300 Watt WIN-12/300TL
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: Replacement AC for ARC13AACBL2
- Q&A: Best Converter Upgrade For WFCO 8935 With Lithium Batteries
- Q&A: Replacement Motor for Lippert Stabilizer 337199
- Q&A: What Inverter Would Work as a Replacement to the WIN-12/300TL?
- Q&A: Pollak Replacement 7-Way Connector Part Number PA66-MD40
- Article: Demco Vehicle-Specific Base Plates
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How Much Solar Power Do I Need For My RV?
- Article: 4-Step Guide to Installing RV Solar Power
- Article: What is the Best Trailer or RV Storage Cover

