Replacement Ceiling Garnish and Gasket for Fan-Tastic Vent Model 2000RDMS

Question

Question:

Can you please tell me the part number for the interior garnish for a Fantastic vent model 2000RDMS. Also need the seal that goes between the fan unit and the hood of the van 2001 GMC Jayco Camper Van. Thank you.

asked by: Wendy

0

Expert Reply:

Your Fan-Tastic Vent model 2000RDMS is a standard 14 x 14-inch RV roof vent and you can select an interior ceiling garnish trim ring from the linked page. We have white and off-white garnishes in various depths, and this depth is called the leg length. For instance, part # FVK2040-80 is an off-white garnish with a 4-1/2-inch leg length and we have models with longer leg length too. You can easily trim these down to a shallower depth using tin snips # PT79ZR or a small rotary cutting tool like a Dremel.

For gaskets and seals we offer dome gasket # BVD0455-01 and Weatherstrip Tape # WS1434 which measures 1/4-inch thick x 3/4-inch wide and that has a self-adhesive backing for easy installation.

expert reply by: Adam R

0

Answer 1

It sounds like you have the standard garnish for Fantastic Vents, but you will need one more measurement to make sure you get the correct one. This being the height of the leg. The Fantastic Vent Ceiling Garnish #FVK1060-80 will have a 6" leg…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Replacement Ceiling Garnish and Gasket for Fan-Tastic Vent Model 2000RDMS

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching