Hole Size Needed When Installing Replacement Access Hatch for RVs # A10-2170VP

Question

Question:

What size hole saw is needed?

asked by: James V

1

Helpful Expert Reply:

The hole size needed when installing the Replacement Access Hatch for RVs # A10-2170VP that you mentioned is 4 inches.

expert reply by: Jameson C

1

Answer 1

The diameter of the trim ring on the Valterra Replacement Access Hatch for RVs - 5" #A10-2171BKVP is 6-3/4 inches. The measurement from mounting hole to mounting hole on center is 6-1/8 inches. I've attached a video that gives you these…

view full answer...

Answer 2

It is indeed available in black, as part #A10-2170BKVP. I've linked to a product description video featuring the #A10-2170BKVP.

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 7

Hey Steven, this is a great question but yes the correct bearing kit you need for your 2025 Grand Design 27BH with 5,100 lb axles is the kit for 5,200 lb axles part #BK3-300 which comes with the correct bearings, races, and seal. Did you have a…

view full answer...

Answer 8

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 9

Hey Robert, congrats on your new 5th wheel trailer! It is highly recommended to use a sliding hitch like the B&W Companion item #BWRVK3370 the shorter 6-3/4' bed on your 2026 Ford F-350. The slider will ensure you have clearance when making…

view full answer...

Answer 10

Hey Adam, we have just what you are looking for with the B and W fifth wheel rail kit part #BWRVK2402 which is a confirmed fit for your 2017 Ford F-250 and is the industry standard rail design which means it will fit the hitch you have. This is a…

view full answer...

Answer 11

The B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt #BWRVR3200 will fit your 2018 Ford F-250 with aluminum bed but B&W doesn't recommend it. You will want to use some sort of spacers/isolators that…

view full answer...

Answer 12

Hello Dan, Welcome to etrailer. I am really glad you found us! First off, congrats on the North Point!! You are absolutely right to question the salesperson’s recommendation. Unfortunately, some dealers focus more on moving units than on making sure…

view full answer...

Hole Size Needed When Installing Replacement Access Hatch for RVs # A10-2170VP

Product Page this Question was Asked From

Continue Researching