Replacement Coupler for Trailer to Replace Shelby 5101
Updated 06/21/2018 | Published 06/20/2018
Question:
Trying to find a replacement coupler spring latch assembly for a Shelby 5101 coupler. I tried a universal kit but it will not stay latched on the ball.
asked by: Jeff
0
Expert Reply:
Shelby has been out of business for quite sometime so the best option you'll find is replacing the coupler with a new one. For tha that we have the A-Frame Coupler part # CA-5100-Z which is very similar to the Shelby and would work well. It has a 5k capacity, a trigger latch and fits a 2 inch ball.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
A-Frame Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Weld On - 5,000 lbs
- A-Frame Trailer Coupler
- Standard Coupler
- 50-Degree Frame
- Weld-On
- 5000 lbs GTW
- 2 Inch Ball Coupler
- Trigger Latch
- 2-1/4 Inch Hole
- Marine Grade
- etrailer
more information >
Continue Researching
- Q&A: What do I Need to Go from Electric Brakes from Hydraulic with Surge Brake Actuator?
- Q&A: Replacement Disc Brake Kit for Mastercraft Trailer
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Q&A: Replacement Leaf Spring For Dexter Leaf Spring # 072-099-01
- Q&A: Replacement for Shelby 5101 Coupler
- Q&A: Is There a Repair Kit for Atwood Coupler?
- Q&A: Hub and Drum Assembly with 8 on 6-1/2 Bolt Pattern for Dexter 10,000 Pound Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: Trailer Lighting Requirements
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure a Trailer Axle