Can a Single Path Air Lift Compressor System be Switched to a Dual Path System
Updated 02/13/2018 | Published 02/12/2018
Products Featured in This Question
Question:
Good day , I currently have the Air lift 25592 and was curious if i was able to upgrade it to Dual path using this AL22629 part . want to be able to control the bags individually but with one compressor
asked by: Shawn
Expert Reply:
There are actually several parts you would need to convert a single path system to a dual patch system. In addition to gauge panel # AL26229 you would need a second low pressure sensor, # AL24558, and a y-harness with check valves.
You can use check valve # F9399-1 sold in quantities of 1, a union Tee such as # F3025-1, also sold in quantities of 1. And you will need some additional air line such as # F9153. You may also need connector # F3046-1. Basically if you look over the diagram for the dual path system, # AL25812, you can compare it to the parts you already have and see if there is anything I missed. I am pretty sure that is everything.
