Weight Distribution Recommendation for 2016 LXE Aliner
Published 02/10/2018
Products Featured in This Question
Question:
I asked yesterday about a weight distribution hitch for a light trailer. I am worried my trailer is too light for a weight distribution hitch. I weighs about 2200# when I load it and the tounge weight is around 200#. I do add load in the back of my FJ but not a lot of weight is behind the tires. It saggs and when I drive at night my lights bother people. I was wondering if this might be an option to help. I looked at the air bags but I am afraid it might be too hard for me to install. I like that this doesn’t need air adjustments too. Do you think this might work for me? I am surprised the FJ saggs with this weight but it does. I also put a kayak on top which probably effects it some.
asked by: Roger H
Expert Reply:
If you think your tongue weight will be at least 250 lbs the Fastway e2 Weight Distribution # FA92-00-0600 will work great. It sounds like you are really close if not over the figure. It's hard to come up with a WD system for a lower rated setup though. Most applications with that low of a tongue weight either have hitches not rated for WD systems or the WD system just isn't needed.
To install a ball you'll need a thin walled socket like # ALL643216.
For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.
Continue Researching
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Comparing Fastway e2 Round and Trunnion and Equal-i-zer Trunnion Weight Distribution Systems
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Recommended Weight Distribution System for R-Pod Trailer
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Q&A: Choosing Between A Fastway Weight Distribution System With Round Bars Or Trunnion Bars
- Article: Determining Trailer Tongue Weight
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Weight and Sway Distribution Hitch For 2013 Camplite Trailer And Aluminum Frame
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Can Weight Distribution Be Ordered without Shank to Allow Use of Drop Shank
- Q&A: Recommended Shank with More Drop for Equal-i-zer 6K Weight Distribution System
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
Roger H.
2/10/2018
I asked yesterday about a weight distribution hitch for a light trailer. I am worried my trailer is too light for a weight distribution hitch. I weighs about 2200# when I load it and the tounge weight is around 200#. I do add load in the back of my FJ but not a lot of weight is behind the tires. It saggs and when I drive at night my lights bother people. I was wondering if this might be an option to help. I looked at the air bags but I am afraid it might be too hard for me to install. I like that this doesn’t need air adjustments too. Do you think this might work for me? I am surprised the FJ saggs with this weight but it does. I also put a kayak on top which probably effects it some.