7-Way Trailer Connector and Brake Controller for a 2008 Nissan Pathfinder

Updated 01/18/2018 | Published 01/17/2018

Products Featured in This Question

Mounting Bracket and Installation Hardware - Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End

(1219)

$4.87

Question:

I have a 2008 nissan pathfinder with factory tow package with 4 pin flat receptacle. I need a 7 pin rv receptacle. Looked over site but leaves me confused on what to get. And help....

asked by: Joe

Expert Reply:

I have the perfect option to get your 2008 Nissan Pathfinder setup with a 7-way trailer connector and you will not need to cut or splice any wires to do so. For this, I recommend using the T-One Vehicle Wiring Harness with 7-Way Trailer Connector part # 118266. The T-One harness comes with everything you will need to install a 7-way trailer connector on your Pathfinder. If you do not have a 7-way mounting bracket on your trailer hitch than you can use part # 18140 and part # PK12711U to add one.

If your trailer has brakes then you will also need a brake controller and for that I recommend the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 as this is one of our most popular and best selling brake controllers due to its integrated safeguards and easy to use features. There is a plug-in harness for your vehicle that will easily allow you to install the above brake controller using part # 3050-P.

I have attached a review video of the harness and controller for you as well.

expert reply by: Conner L