Equalizer Recommendation that is 7-3/4 inches Long and 2.875 inches Tall

Published 12/19/2017

Products Featured in This Question

Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole

(211)

$17.70

Question:

I have stock trailer that I purchased a Tandem Axle Suspension Hardware Kit LC281285 from you about a month ago and I finally got around to put it in but I need equalizers. The upper hole is worn very oblong. Hangers are good. from center hole to lower holes is 2.875inch as near as I can measure it. Lower holes are 7.75inch center to center. Casting # is UCF 775. Hole dia, all three holes, is 11/16. Do you have 2 equalizers that matches these spec. or something that will work.

asked by: Clayton E

Expert Reply:

Based on the dimensions you listed the equalizer you need is the part # TREQE1. This equalizer has 7-3/4 inches between the mounting holes from left to right and 2-7/8 inches vertically.

expert reply by: Jameson C