Solution for WeatherTech Floor Mat That has Edge that Doesn't Sit Flush

Updated 05/06/2024 | Published 09/09/2017

Question:

The liner is wavy on the right and left side. How can I fix this?

asked by: Mike G

Expert Reply:

Sometimes when new the Weathertech floor mats will have a bend or will want to curl up based on how the mat was stored in it's packaging. It will eventually regain it's proper shape, but Weather tech has recommended to us to let it sit in the sun or roll it the opposite direction for an hour or so to help speed the process up.

expert reply by: Jameson C

click to enlarge

Julie M.

5/6/2024

My weather tech is 4 plus years old and never flattened out. Actually the curl has gotten worse where I get into my vehicle. Do you have any suggestions to get it to lay flat? Maybe a heat gun… because the sun suggestion didn’t work.

Jameson C.

5/6/2024

@JulieM I'm sorry to hear that. I would try a heat gun to soften the material up and then see if you can bend it the way it needs to go once the mat is nice and hot.