Best Way to Tap Into The Factory Transmission Pan on a 2012 Ford F-150
Updated 08/25/2017 | Published 08/24/2017
Question:
Hi The auto meter sending unit Temp probe is about 5/16 in Dia. What size is the shaft hole in this part where sender go thru into the pan? Thanks
asked by: Rich
Expert Reply:
The mounting hole size for the Derale Universal Drain Plug Kit for Transmission Pan Coolers part # D13010 is 1/2" and the inlet thread size is 1/8". If you are looking to install a sending unit on an aluminum transmission pan, I recommend using the Derale 3/8" NPT Female Aluminum Weld Bung part # D98002 and having a professional certified welder tig weld the bung on for you. From here you can then use a NPT 3/8" to 5/16" reducer to work with your sending unit.
Don't forget to use Loctite Thread Sealant 545 part # LT37482 on all of your fitting for a watertight seal.
Product Page this Question was Asked From
Derale Universal Drain Plug Kit for Transmission Pan Coolers
- Accessories and Parts
- Transmission Coolers
- Drain Plug
- Derale
more information >
Continue Researching
- Q&A: How To Install The Derale Universal Drain Plug Kit for Transmission Pan Coolers # D13010
- Q&A: Can a New Hole be Drilled for the Derale Universal Drain Plug Kit # D13010
- Q&A: Where Is Brake Controller Install Wiring for 2021 Chevy Suburban