Question How Do Most Titan Model 10 Actuators Weld to Trailer
Updated 08/01/2017 | Published 07/31/2017
Question:
Hello, Can you explain how the Titan Brake Actuator - Painted - Drum - Lunette Ring - Weld On - 12,500 lbs Item # T1607700 is welded to a trailer tongue? Also, would item # T1607700 work for converting the air over hydraulic braking system on a military surplus A/M32K-4inch trailer to straight hydraulic? Thanks,
asked by: Bill K
Expert Reply:
If you check out the picture I attached to this you'll see how one person welded on a Titan Model 10 like the part # T1607700 that you referenced. It really depends on the application though. Either way you'll need to find a qualified welder in your area to do the work.
The coupler would be the correct kit for starting the conversion of the brake style on your trailer. For more info on this check out the FAQ article I attached on the subject.
Product Page this Question was Asked From
Dexter Brake Actuator - Painted - Drum - Lunette Ring - Weld On - 12,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Construction Trailer
- Weld-On
- 12500 lbs GTW
- Lunette Ring
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Dexter Brake Actuator Review
- Q&A: Does Titan Model 10 Actuator Replace Dico Model 10
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Video: Demco Hydraulic Brake Line Kit for Single Axle Trailers: The Breakdown
- Q&A: Replacement Coupler For Boat Trailer With Surge Brakes Weld On and Bolt On Option
- Shop: Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs
- Shop: Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts
- Search Results: bearing 25580
- Search Results: t2374600
- Search Results: brake line
- Search Results: brake hose
- Search Results: 2~5/16 hitch ball
- Search Results: brake line hose
- Search Results: 2~5/16 ball
- Q&A: Where Do the Rubber Bearings Go On the Titan/Dico Model 10 Surge Brake Actuator
- Q&A: Replacement Inner Slide for Titan Model 10 Actuator with 2-5/16 Coupler
- Q&A: Replacement for Gabriel Shock Model 610712
- Q&A: Is There a Installation Video That Will Help With Replacing Shocks On Dexter Model 10 Surge Actuator
- Q&A: Parts Needed to Add Electric Lockout to Dexter Brake Actuator
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Shop: Dexter Brake Actuator w/ Drop - Painted - Disc - 2-5/16" Ball - Weld-On - 12,500 lbs
- Shop: Dexter Brake Actuator - Painted - Disc - 2-5/16" Ball - Weld On - 12,500 lbs
- Shop: Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
- Shop: Dexter Adjustable-Channel Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs
- Shop: Dexter Brake Actuator w/ Drop - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs