Availability Of Keyed Alike Locks For Bulldog Collar-Lok Coupler # BD028287 And Trailer Hitch

Updated 02/28/2011 | Published 02/26/2011

Products Featured in This Question

Bulldog Collar-Lok Coupler w/ Low-Profile Latch - 2" Ball - A-Frame - 7,000 lbs

(130)

$118.07

etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome

(3573)

$25.40

etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span - Chrome

(3573)

$22.23

etrailer Surge Brake Coupler Lock - 3-3/8" Span - 1/4" Diameter - Chrome

(516)

$20.96

Question:

Do you guys have a coupler lock that is long enough to fit where the lock pin goes and that you can use while towing? Preferably I would like a hitch lock coupler combo that are keyed alike.

asked by: Napoleon S

Expert Reply:

If you are needing a lock for the Bulldog Collar-Lok Coupler w/ Low-Profile Latch, part # BD028287, and a lock for the hitch receiver on your vehicle that are keyed alike you can use the Deadbolt brand lock.

For your Bulldog coupler you would have to use the Trailer Coupler Lock, part # e98888. This is a coupler lock with an inside width of 3-3/8 inches. I pulled the Bulldog coupler from our warehouse and measured the size of the lock pin that goes in the coupler. It measured 5/16 inch diameter and a length of 2-3/4 inches. I tried the Deadbolt lock in a Collar-Lok coupler and it fit and did keep the collar lock from opening. See the picture to the right that will show it installed on the coupler.

If you have a 2 inch hitch on your vehicle, you can use the Deadbolt Trailer Hitch Receiver Lock, part # e98880, which has an inside width of 2-5/8 inches. If you have a 2-1/2 inch hitch you can use the Trailer Hitch Receiver Lock, part # e98881, that has an inside width of 3-1/16 inches. I have included a link to a video review of this lock for you.

When ordering the parts you will just need to choose the keyed alike option that is located just under the price on the product page of that item.