Adding a 7-Way Trailer Connector to a 2015 Ford Expedition

Updated 04/18/2017 | Published 04/16/2017

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors

(756)

$35.94

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3536)

$118.67

Question:

Good Morning, I have a 2015 ford expedition with the standard tow package and not the heavy duty. I am looking to tow a trailer that is over 2000 pounds but under the 6600 pound limit for standard. I have ordered the OEM trailer brake controller but need to order a 7 pin connector for a standard RV trailer. Is there anything specific I need ? or what is the best options for the 7 pin?

asked by: Mark N

Expert Reply:

First check under your 2015 Ford Expedition for a round connector, perhaps in the vicinity of the frame rail or spare tire, that could plug into the round connector on 4- and 7-Way # C55774. If that connector is present under the vehicle then you just have to plug it into the 20119 and then mount the connector. If you do not have that connector but have a 4-Way then you will have to hardwire in the 7-Way and brake controller using # ETBC7.

expert reply by: Michael H