Correct Trailer Hitch Receiver and Other Parts Needed to Tow a Trailer With a 1991 Dodge 150

Updated 04/11/2017 | Published 04/09/2017

Products Featured in This Question

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(41)

$213.94

B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black

(4623)

$269.00

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(48)

$31.83

Question:

What trailer hitch is to be used for my 1991 Dodge Ram 150 5.2L V8? Ive looked at a few and none seem to have my truck listed....about to buy a trailer so this will be next...

asked by: Joshua C

Helpful Expert Reply:

I confirmed with Draw-Tite that their trailer hitch receiver # 75038 will fit your 1991 Dodge 150. This is a Class III, 2 inch receiver that does require drilling for installation. I've linked a video of the hitch being installed onto a Ford but the process will be the same.

Also if you need a wiring harness # C55317 is the correct harness. This will provide a 4-way trailer connector on the back of your truck.

You'll also need a ball mount and hitch ball if you don't already have them. I've attached link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once you choose a ball mount you can then choose a hitch ball to fit it.

One way to make choosing a ball mount easier is to go with an adjustable ball mount like the B&W Tow & Stow # BWTS10038B. It features the ability to be flipped under the hitch when not using it and will provide up to 5-1/2 inches of rise or 5 inches of drop.

I've also included links to some articles on towing that you might find helpful.