Which Valterra Waste Valve Replacement Recommendations
Updated 02/20/2017 | Published 02/18/2017
Products Featured in This Question
Question:
Hi, I need to replace both my black and gray tank valves 3inch and 1-1/2inch respectively. The ones in the unit are cable actuated. Can I buy just the valve bodies and gaskets, etc. or do I need to buy all new cables too? Which parts do I want to buy? Thanks!
asked by: Lou
0
Expert Reply:
For the 3 inch valve you would want the part # T40. For a 1-1/2 inch valve you would need the # T1001VPM. This will be much easier than trying to rebuild your current ones.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Spigot
- RV Waste Valves
- Straight Valve
- Single Waste Valve
- 3 Inch Valve Body
- Manual
- 3 Inch Hub
- 3 Inch Spigot
- Stationary Valve
- Valterra
more information >
Continue Researching
- Q&A: How Much Power Does the 3.3 cu ft Norcold RV Mini Fridge w/ Freezer Use?
- Q&A: What is Difference Between RV Waste Valves Hubs and Spigots
- Q&A: How to Determine Correct 3" Waste Valve for RV Black Water Tank
- Q&A: Can D&W Inc. Spray-Port RV Exterior Hose Hookup Backflow Preventer Be Replaced With Brass
- Q&A: Lift Kits Available for Torflex Axles
- Q&A: Replacement 1-1/2" and 3" Valterra Bladex RV Waste Valves With Threaded Shafts
- Q&A: Which is Better a Fulton or Dutton Lainson 2 Speed Trailer Winch
- Article: How to Winterize & De-Winterize Your RV (Simple Guide)
- Article: How Does an RV Water Pump Work?
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How Your RV Water System Works: A Complete Newbie's Guide
- Article: Best Boat Trailer Tires
- Article: Trailer Wiring Diagrams
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs