Recommended Weight Distribution System For 25 Foot EZLoader Pontoon Tritoon Trailer
Updated 01/09/2017 | Published 01/07/2017
Products Featured in This Question
Question:
I need a weight distribution hitch for my new boat : details: - 2016 Ford F150 XLT Supercrew, 3.5L eco with tow package - short bed. - 25 foot EZLoader Pontoon tritoon trailer. tandem wheel. 15inch ST225. HD axles - Boat and trailer weight is approx 5600-6000 lbs. TW is approx 400-450 lbs says boat dealer salesman. - Trailer has EOH brakes with stainless steel rotors thanks!! to etrailer.com. - id like sway control too. - Also, prefer to be able to be able to backup if possible with WDH installed. I am looking for the very best WDH you can offer me. What do I buy ? Thanks!
asked by: Will C
Expert Reply:
For your EZLoader Pontoon Tritoon Trailer, I recommend the Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW, # RP58393. This will allow you to use a weight distribution system that includes sway control.
The biggest focus of weight distribution systems is total tongue weight, which is the loaded tongue weight of the trailer along with any cargo behind the rear axle of the tow vehicle. The tongue weight of a trailer is normally 10-15% of the total weight. With a boat, this may be slightly different, but you want to get a system based on the middle of the range it allows for tongue weight. I've attached an article on determining the tongue weight of your trailer.
With the information given, I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion # FA92-00-0800. This will give a total (including cargo behind the rear axle) tongue weight scale between 0 and 800 lbs. It will have the metal on metal friction sway control and it will allow you to back up while installed. This is most likely the ideal system for your application.
Let me know if you have further questions.
