Will the Lippert Correct Track II Alignment Kit Work With A MORryder CE30000 Equailzer
Published 12/01/2016
Products Featured in This Question
Question:
If installed on dual axle with the MORryde/3000 equalizer, do you still install the middle correct track bracket hanger for the equalizer? I watched on of your installation videos and I thought the installer said you didnt need to install the middle hanger if you had the Equa Flex equalizer. The installer may have skipped quickly over this segment since he was installing correct track using only axle hanger brackets without an equalizer.
asked by: Tom L
Expert Reply:
According to Lippert, the Lippert Components Correct Track II Alignment Kit - Tandem/Double Axle # LC87220 is only designed to work with a standard equalizer or the Lippert Equa-Flex Cushioned Equalizers like # LC279688 for tandem axles 6k - 8k pounds. If you are using a the traditional equalizer system you will use the Correct Track II hanger on the middle hanger. If you have one of the Lippert Equa-Flex equalizers, you do not need to install the middle Correct Track II hanger.
However, Lippert states that the Correct Track II Alignment Kit cannot be installed if using Dexter's E-Z Flex, like # K71-652-00 or MORryde's CRE3000 equalizers. You would have to replace the equalizers to either the standard or Equa-Flex designs to correctly install the Correct Track II on your trailer. The Correct Track II kit will only work with standard equalizers or the Equa-Flex equalizers.
Depending on the dimensions of your equalizer and the needed weight rating, I recommend the Lippert Equa-Flex Equalizer like # LC279688 over the standard equalizers. The Lippert Equa-Flex's rubber core will give you better ride by absorbing road shock and reduce chucking. The Equa-Flex uses the maintenance-free never fail bushings. The bushing are self-lubricating, making the use of grease necessary.
If you decide to use Lippert's Equa-Flex equalizer over the standard equalizers, then you will not have to install the middle bracket of the Correct Track II. If you use the standard equalizers then you will need to install the middle hanger for the Correct Track II on the middle bracket.
