Fuse Location For Trailer Wiring On 2009 Chevrolet Silverado Duramax
Updated 06/01/2020 | Published 09/24/2016 >
Question:
I have a 2009 chev duramax I plugged up to a trailer that was not wired right and blew a fuse for my trailer brakes. its one of the 60 amp fuses im sure but I cant find it.
asked by: David H
Expert Reply:
You should be able to find a fuse that is labeled for trailer wiring either in your owner's manual or on the inside of the fuse holder lid.
From my research I found a few references to the fuses for a trailer. Check out Fuse # 1, It is a 40amp fuse and should be marked for trailer wiring. Numbers 9 and 10 are listed as trailer turn fuses and are 10amps. You can also check fuse # 14 which is the vehicle stop light. And if needed check out fuse # 19 that is listed as trailer backup. I attached a drawing of the fuse panel and I highlighted the fuses I mentioned above.
Product Page this Question was Asked From
Twist-in, 7-Pole, RV-Style Trailer Connector for Chevy and GMC Vehicles - Vehicle End
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- No Tow Package
- 7 Blade
- Plug Only
- Pollak
more information >



Dave
5/23/2020
I have a 2007 2500 HD diesel. Can’t find the trailer RT/Stop fuse that was supposed to be #1 under the hood fuse box. The %1 location is a blank. No terminal pins. Where did they move it? I don’t have power at the GM hitch for trailer RT/stop.