How To Raise Trailer to Allow It to Be Towed Level With Taller Truck

Published 09/07/2016

Products Featured in This Question

Equalizer for 2" Wide Slipper Springs - 17-3/8" Long - 1" Center Hole

(102)

$136.71

Dexter Trailer Springs Over-Under Conversion Kit

(850)

$88.46

Dexter Trailer Springs Over-Under Conversion Kit

(850)

$82.90

Question:

At level my king pin is 51 inches, and hitch is 56 inches. The trailer has torson ax k we and pin box is already at the highest setting. Cant lower the hitch because of clearance, what do I do yup level the trailer for towing?

asked by: Andrew S

Expert Reply:

Typically lifting the trailer suspension is the best solution for situations like what you described.

You can do this by moving the axles from being above the leaf springs to below the leaf springs.

The diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is 3 inches diameter, the Dexter Trailer Springs Over-Under Conversion Kit, # K71-385-00, would be a great choice and if your axle is 2-3/8 inch diameter you could use the Over-Under Kit, # K71-384-00. These kits can be installed without welding but the manufacturer strongly recommends having the new spring seat tacked in place on the other side of the trailer axle.

Some refer to this process as "flipping the axles," but since axle has a slight bow to it you can't just flip them and reinstall them under the springs using the same spring seats. You have to install new spring seats on the opposite side of the axle so that it can be moved below the spring.

expert reply by: Jameson C