Replacement Mounting Hardware for Pro Series 1K Snap-Ring Swivel Marine Jack
Published 09/01/2015
Question:
I need to purchase another one of the two mounting barsthe steel channel 1 1/4inch x 6 1/4 with five 3/8inch bolt holes that mounts opposite the swivel plate. Are those sold separately? Or do you have a spare one laying around from a defective trailer jack?
asked by: Dave
0
Expert Reply:
For your Pro Series swivel jack you can use hardware kit # F500286 which comes with the 2 brackets, 4 bolts, and 4 nuts. The individual parts are not available by themselves.
expert reply by:
Michael H
0
Continue Researching
- Q&A: Is there a Trailer Wheel that Fits a 4 on 3 Inch Bolt Pattern
- Q&A: Mounting plate Dimensions for the Pro Series Jack # PSEJ10000101 to Mount on a LAK Sailplane Trailer
- Q&A: Trailer Jack Replacement Recommendation for Pro Series 1,000 lb Jack
- Article: Trailer Wiring Diagrams
- Q&A: Is There a Direct Bolt On Replacement for Shelby 1,000 Lb Boat Trailer Jack
- Q&A: Fulton Jack Recommendation for Triton Dual Axle Boat Trailer with Weld On Fulton Jack
- Q&A: Replacement Swivel Jack for a Champion Boat Trailer
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended 5.30X12 Tire and Wheel with High Speed Rating
- Article: How to Determine Tire/Wheel Diameter
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Best Camper Jacks
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer