How to Install a Brake Controller in a 2011 Lexus RX 350

Updated 06/17/2015 | Published 06/16/2015

Products Featured in This Question

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3480)

$118.67

Question:

I have a 2011 Lexus RX-350, do you know if Lexus has a plug hanging under the dash from the brake switch? The car has the trailer tow package, the four pin plug for the turn, brake ETC was found at the driver side rear tail light. Now I want to install a brake controller. Any help would be greatly appreciated.

asked by: Jamie T

Helpful Expert Reply:

There isn't a plug in adapter available for your 2011 Lexus RX-350, but we have the product you would need to install a brake controller in your vehicle. You would want the part # ETBC7. This comes with everything needed to install a brake controller and convert your 4-way to a 7-way.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes.

expert reply by: Jameson C