How to Determine Hanger Spacing on a Tandem Axle Trailer with 6K Axles and Slipper Spring Suspension

Updated 02/19/2015 | Published 02/18/2015

Products Featured in This Question

Equalizer for 2" Wide Slipper Springs - 17-3/8" Long - 1" Center Hole

(97)

$134.07

Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers

(56)

$244.00

Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers

(56)

$252.05

5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long

(256)

$71.32

Question:

What should distance between hanger centers be on slip spring light 6k axles on 20ft 16in tires

asked by: Billy S

Expert Reply:

The hanger spacing is going to depend on a few things including the spring measurements and the equalizers being used. But if you were using spring # e67SR the distance between the hangers would be around 29-3/4 inches. However this is using hanger kit # AP202-H202 with 10-1/8 inch equalizers.

If you were using kit # AP216-H202 the hanger spacing guideline would be 31-1/2 inches because the equalizers are longer. So you can see that it changes depending on the components being used.

Also, these measurements are a guideline only. The true spacing can only be determined by mocking up all the suspension components first before permanently installing everything.

expert reply by: Michael H