To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This frost-plug heater replaces the frost plug in your engine block and submerges in the coolant to keep engine fluids from thickening. Results in easier start-ups, faster heating of your cab, and less wear and tear on your vehicle in cold weather.
Features:
Specs:
Notes:
Start your engine easier and warm your cab faster in cold weather with this frost-plug-style engine block heater. Heating your engine coolant keeps it from thickening and freezing, resulting in more reliable start-ups and smoother operation altogether. It also lessens the workload and extends the life of your vehicle's battery. And because starting your engine when it's warm creates less condensation in the engine block than starting it when it's cold, your engine will get better initial fuel vaporization, which causes fewer emissions and less pollution.
This frost-plug heater replaces the core plug in your engine block. The power cord on the heater is removable so that you won't need to buy a whole new heater if the cord gets damaged. The cord can be routed through your grille for easy access to a 120-volt outlet or extension cord. If needed, a longer or shorter cord (sold separately) can be purchased to better fit your application. Make sure the heating element is fully submerged in the coolant before plugging it in.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Kat's Heaters 120 Volt, 600 Watt custom engine block heater. Now this part here will ensure smoother startups and faster heating and defrosting of your cab. This part'll replace the frost plug that's in your engine block and it submerges in the coolant. This will warm the engine fluid to increase lubrication and performance, and it keeps that fluid from thickening and protects against damage in cold weather. This will also preheat the engine to reduce condensation in the engine block.
That'll help emit less pollution and fewer gas emissions. Does come with this 5-foot-long removable power cord. Basically, you just run this through your grill, plug it into a standard 120 volt AC outlet, and on the other end of the cord would basically just plug right into your heater just like that. Be sure it's pushed in all the way, and then once you get it all pushed in, you're all ready to go. This is constructed of a corrosion-resistant brass and it is custom fit for your vehicle.
It is CSA approved and it is made in the U.S.A. Now the application on this fits a 41 millimeter diameter frost plug. The wattage on it is 600 Watts and the amperage is five amps. Now a couple notes on this heater, do you not wanna use this heat, do not use this heater with 100% antifreeze solution and you do not start your engine with the heater plugged in. But that should do it for the review on this Kat's Heaters 120 Volt 600 Watt custom engine block heater..
Thank you!
Do you have a question about this Vehicle Heater?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.