Turn your camper into a comfortable place to host overnight guests. This trifold loveseat gives you relaxing seating by day and a real bed by night without the clutter of a traditional sleeper sofa.
When family or friends stay over, you don't need a complicated setup, a blow-up mattress, or piles of cushions laying around the floor. Many traditional sleepers make you strip the seat cushions to pull the bed out, but this one doesn't. Lift the base, unfold the legs, and fold the backrest flat. The seat cushions stay put, the back cushions double as a headboard or pillows, and there's nothing extra to stash away. You'll get 5" of supportive padding and no hard bars digging into your back. It won't roll you and your sleeping partner into a taco overnight (we've all been there), and if your pup curls up at the end, the feet won't sag. In the morning, the bed folds back into a sofa without a struggle and you'll have your seating back in no time. That's one less chore on travel mornings and one more reason your guests will sleep well.
Narrow RV doors shouldn't keep you from upgrading your space. This loveseat ships in sections you can carry through your door and assemble inside. Before you order, measure your doorway and the spot where it will unfold. The overall depth of this sofa is 33", and when disassembled, it's narrow enough to fit through most RV doors. Once you have your new loveseat in place, you'll have room to move, open your fridge, and enjoy a modern, upgraded living area.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Steven here with etrailer. Today we're looking at our Thomas Payne Trifold RV Loveseat. It's 62 inches wide overall, and the color is a canvas back granite. Now, believe it or not, this is a sofa that converts into a three step bed, and I'm gonna go ahead and show you that. So right off the bat here, you've got a couple of cushions here. They're just held on with some hook and loop.
I'm gonna bring this up here so you can get a better look at this cushion. So that's that canvas back granite color we we inchesre talking about. As you can see, they're pretty wide cushions. I'm gonna set that off to the side here. Then you take your second one off.
And then from here, it's pretty simple. You just lift up the front of the sofa seat here. And then once you get it up here, you have two legs that fold out on this side and one on the other. And these do have one whole set of adjustment, meaning I could take two pins out of each leg, pull these legs down to taller. And the reason you might want that or need that is if you have a slide out in your camper RV, you may have a lower floor where that slide out came out.
So this will get that height to match up if you need it. So once you get the legs folded out, simply fold it out, put it down, and then the back rest just fold flat, and there you go. Now you have a bed. And of course, you can take both cushions if you want, put 'em back here against the back, give you some headrests if you need it, or if it's against the wall flush already, then you can leave those off and give you that extra six or seven inches of space. Now when I measure this beforehand, I got 62 inches long, a width front to back, 33 inches, and the height, whenever this back part was standing straight up, I got 28 inches exactly.
So from the top of this to the floor with the feet installed is 28 inches. So, why do I go through that If you can fit this through your door fully installed like this, great. But this comes off of it whenever it comes in the box, you have to put this on. There's four bolts. And then the feet, of course, are off of it when you put it together as well. So that's gonna lower your height by a whole lot to be able to go through those RV doors a lot easier and fit through there. So just keep that in mind whenever you're putting it together. You may wanna put it together inside of the RV coach camper. Pull it back up. Just be careful with some of those pinch points. Pull the legs back in on themselves like so. Pull that flat. Then it's as simple as just putting your cushions back. And as you can see, that black hook and loop only goes up about three quarters of the way. You wanna put the side that has the shortest gray on the top, that way that hook and loop has the best hold on the back. So folks, again, the feets get screwed on, the back gets bolted in place. Make sure you're checking the box fully whenever you take it outta the box. It's gonna come probably freight 'cause of the size. When I took this outta the box, the four bolts that hold the back onto it, we inchesre already inside the frame bolted together. So make sure you're checking there and again, checking any nook, cranny, any of the packaging if you're missing any small hardware as it could have got loose in shipping. The seats on the base are about three inches tall. They're hard plastic. This is an durable upholstery, but looks and feels really nice and smooth. I'm a pretty big guy, I'm 6'2", and this is holding me nice and fine and it's a nice comfortable couch. Folks, that's gonna wrap up our look together. If you have questions about this or any of our other products, reach out to us. We're here to assist you. Have a good one.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.