New Arrivals
Replacement ECU Configuration Kit for Dexter Tow Assist ABS System
In Stock
Give every Tow Assist system a perfect start. This ECU configuration kit lets dealers program axle count, tire size, and VIN with the included software and cable, ensuring accurate setup and reliable ABS performance.
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- ABS System Wheel Sensor Parts
- Control Module
- Dexter
Dexter Tow Assist ABS Bluetooth Communication Adapter
In Stock
Stay connected on every trip. This adapter delivers Tow Assist odometer readings and fault codes to the app, giving you live updates while you drive and the reassurance your trailers ABS is helping you stay safe.
- Accessories and Parts
- Trailer Brakes
- ABS System Wheel Sensor Parts
- Electric Drum Brakes
- Bluetooth Adapter
- Dexter
Replacement Inner Member Dexter A-84 Actuator - Single/Tandem w/ Disc - 2-5/16" Ball 8.4K
In Stock
This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with single or double-axle trailers with hydraulic disc brakes.
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Inner Member
- Dexter
Replacement Latch Kit for Dexter A-84 and A-160 Actuators
Replace the worn or damaged latch on your Dexter A-84 or A-160 actuator with this direct replacement kit. Includes latch assembly and hardware to restore secure and reliable trailer hookup.
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- Latch
- Dexter
Grease Cap Plug for Dexter Axle E-Z Lube Grease Caps - Qty 2
In Stock
Replacement Trailer Grease Cap Plugs for E-Z Lube Grease Caps
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Plugs
- Dexter
Dexter Disc Brake Assembly - 9.6" Hub/Rotor - 5 on 4-1/2 - GalvX - 3,500 lbs
Upgrade your boat trailer's braking power with this rust-resistant GalvX disc brake. Kit includes 1 pre-greased hub, inner (L68149) and outer (L44649) bearings, rotor, caliper, mounting brackets, and lug nuts.
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- RH
- LH
- 3500 lbs
- Brake Assembly
- Hub and Rotor Assembly
- Dexter
Dexter Nev-R-Adjust Electric Trailer Brake for Dexter ABS Tow Assist - 10" - Left Hand - 3.5K
Even one worn brake can make towing feel sketchy. Replacing a single ABS brake assembly brings back balanced braking and steadier control, so your trailer handles the way it should when traffic gets tight or the road gets steep.
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- 10 x 2-1/4 Inch Drum
- Dexter
Replacement Shoe and Roller for Dexter 15K 12-1/4" x 5" Air Brakes - Passenger Side
Replaces the shoe and roller for your passenger's-side Dexter 15,000-lb 12-1/4" x 5" air brake.
- Accessories and Parts
- Trailer Brakes
- Brake Shoes
- Dexter
Dexter Nev-R-Adjust Electric Trailer Brake for Dexter ABS Tow Assist - 12-1/4" - Left - 7.5K
Even one worn brake can make towing feel sketchy. Replacing a single ABS brake assembly brings back balanced braking and steadier control, so your trailer handles the way it should when traffic gets tight or the road gets steep.
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 7500 lbs
- Brake Assembly
- 12-1/4 x 2-1/2 Inch Drum
- Dexter
Fortress Bolt-On Cap Service Kit for 9K to12K lb Dexter Axles
In Stock
Your Fortress bolt-on cap has been holding it together - now it's time to return the favor. This service kit gives your Fortress cap fresh gaskets, oil fill plugs, and hardware it needs to stay leak-free and pressure tight.
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Service Kit
- Dexter
Replacement Inner Member for Dexter/Tie Down LP80, LP85 and LP8500 Brake Actuators
This replacement inner member slide fits into the existing outer member housing of your Dexter or Tie Down surge brake actuator. Fits actuator models LP80, LP85, and LP8500.
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Inner Member
- Dexter
Replacement Copper Washer for Dexter Disc Brake Calipers - 7/16" Inner Diameter - Qty 4
Replace worn or leaking copper washers on your Dexter disc brake caliper. These 7/16" crush washers provide a tight, reliable seal between the banjo fittings and calipers to help prevent brake fluid leaks in your hydraulic braking system.
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Caliper Parts
- Hardware
- Washers
- Dexter
Socket Power Drill Adapter for etrailer Scissor Stabilizer Jacks
In Stock
Designed to work with your etrailer scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. Works with 3/8" drill bits.
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Tools
- Socket
- etrailer
Replacement Key for etrailer Trailer Tongue Tool Box - Key Number CH508 - Qty 1
In Stock
Lost the key to your etrailer tongue tool box? Don't worry, we've got you covered. Replaces 1 key number CH508.
- Accessories and Parts
- Trailer Tongue Box
- Trailer Tool Box
- Keys
- etrailer
Replacement Remote with Key for etrailer Self-Contained Hydraulic Jacks
Replaces the remote with key for your etrailer self-contained hydraulic trailer jack (e33VV).
- Accessories and Parts
- Trailer Jack
- Controllers
- Remote Control
- etrailer
Backing Plate for Single Axle Trailer Fender - 32" Long x 12" Tall - Qty 2
In Stock
Replace 2 worn or damaged backing plates on your single-axle trailer fender. Backing easily blocks water and road debris from hitting the side of your trailer.
- Accessories and Parts
- Trailer Fenders
- Fender Back
- CE Smith
CE Smith Trailer Coupler Latch Replacement - 2" Ball - 3,500 lbs and 5,000 lbs
Coupler repair kit contains all needed replacement parts for your CE Smith straight-tongue coupler with a 3,500-lb or 5,000-lb capacity, except for the coupler housing.
- Accessories and Parts
- Straight Tongue Trailer Coupler
- Coupler Repair
- CE Smith
CE Smith Tail Light Bracket - Aluminum - 10" Wide x 4" Tall - Right Side
In Stock
If you're tired of steel brackets rusting out on your boat trailer, try this aluminum bracket. It's lightweight, durable, and won't rust, so your tail lights stay mounted season after season no matter where you launch.
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Brackets
- CE Smith
CE Smith Safety Travel Flag with Nylon Webbing
In Stock
This towing safety flag is ideal for your kayak, SUP, or anything else you want to tow and draw attention to. Made of Oxford fabric and nylon webbing, so it holds up for the long haul.
- Accessories and Parts
- Trailers
- Watersport Carriers
- Sports Trailer Parts
- Watersport Trailer Parts
- Safety Flag
- CE Smith
CE Smith Tail Light Bracket - Aluminum - 10" Wide x 3" Tall - Left Side
In Stock
If you're tired of steel brackets rusting out on your boat trailer, try this aluminum bracket. It's lightweight, durable, and won't rust, so your tail lights stay mounted season after season no matter where you launch.
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Brackets
- CE Smith
CE Smith Tail Light Bracket - Aluminum - 10" Wide x 3" Tall - Right Side
In Stock
If you're tired of steel brackets rusting out on your boat trailer, try this aluminum bracket. It's lightweight, durable, and won't rust, so your tail lights stay mounted season after season no matter where you launch.
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Brackets
- CE Smith
Replacement PVC Post for 22" C.E. Smith Pontoon Guide-On - 2-3/8" Dia - 18" L - White
Bring your guide-on back to life with this genuine replacement post for your 22" pontoon post guide-on setup. Made from durable, white PVC, it drops right onto your existing brackets to get you back on the water faster.
- Accessories and Parts
- Boat Trailer Parts
- Guide-On Parts
- Posts
- White
- CE Smith
CE Smith Tail Light Bracket - Aluminum - 10" Wide x 4" Tall - Left Side
In Stock
Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Brackets
- CE Smith
Backing Plate for Single Axle Trailer Fender - 30" Long x 12" Tall
In Stock
Replace 1 worn or damaged backing plate on your single-axle trailer fender. Backing easily blocks water and road debris from hitting the side of your trailer.
- Accessories and Parts
- Trailer Fenders
- Fender Back
- CE Smith