New Arrivals
Replacement Wheel Speed Sensor for Dexter Tow Assist System
In Stock
Replaces your wheel sensor on your Dexter ABS tow system.
- Accessories and Parts
- Trailer Brakes
- ABS System Wheel Sensor Parts
- Electric Drum Brakes
- Sensors
- Dexter Axle
Replacement Inner Member Dexter A84 Actuator - Triple Axle w/Disc Brakes - 2-5/16" Ball - 8.4K
This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Inner Member
- Dexter
Replacement Dexter Axle 3-1/2" x 5/8"-18 Press-In Wheel Stud - Qty 1
In Stock
Replaces (1) 3-1/2" x 5/8"-18 Dexter Axle press-in wheel stud for 8K to 12K disc brakes or idler hubs with 5/8" studs.
- Accessories and Parts
- Trailer Hubs and Drums
- Boat Trailer Wheels
- Trailer Tires and Wheels
- Wheel Studs
- 5/8 Inch Diameter
- Drive-In Stud
- Dexter
Fortress Aluminum Threaded Cap Service Kit for 10K to 16K lb AL-KO and Rockwell Axles
Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Service Kit
- Dexter
Replacement Pivot Bushing Hardware Kit for Dexter Suspension Equalizers
Replace the pivot hardware in your Dexter suspension equalizer with this complete OEM kit. Includes bushings, bolts, locknuts, and instructions to restore quiet, reliable performance.
- Accessories and Parts
- Trailer Suspension Parts
- Hardware
- Dexter
Dexter Hydraulic Drum Brake Assembly - Free-Backing - 10" - Right Hand - 3,500 lbs
Passenger's-side 10" x 2-1/4" hydraulic drum brake assembly features a free-backing design for smooth reversing. Fits 3,500-lb axles with 13" to 15" wheels and mounts with a 4-bolt flange.
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- 10 x 2-1/4 Inch Drum
- Dexter
Replacement Cap for Dexter 12V KTI Hydraulic Pump Reservoirs - Qty 1
Replaces the cap for your Dexter 12V KTI hydraulic pump reservoir. Fits DC-4419 and DC45520.
- Accessories and Parts
- Dump Trailer Parts
- Hydraulic Pumps
- Caps
- Dexter Axle
Reverse Lockout Solenoid for Dexter and Tie Down Hydraulic Brake Actuators
Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Solenoid
- Dexter
Dexter Hydraulic Drum Brake Assembly w/ Parking Brake Lever - Duo Servo - 12-1/4" - Right Hand
In Stock
This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 10000 lbs
- 9000 lbs
- Brake Assembly
- 12-1/4 x 3-3/8 Inch Drum
- Dexter
Fortress Aluminum Threaded Cap Service Kit for 10K to 15K lb Dexter Axles
In Stock
Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Service Kit
- Dexter
Replacement Copper Crush Washer for Dexter Disc Brake Calipers - 7/16" Inner Diameter
Replace a worn or leaking copper washer on your Dexter disc brake caliper. This 7/16" crush washer provides a tight, reliable seal between the banjo fitting and caliper to help prevent brake fluid leaks in your hydraulic braking system.
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Hardware
- Caliper Parts
- Washers
- Dexter
Dexter Hydraulic Drum Brake Assembly - Free-Backing - 10" - Left Hand - 3,500 lbs
Driver's-side 10" x 2-1/4" hydraulic drum brake assembly features a free-backing design for smooth reversing. Fits 3,500-lb axles with 13" to 15" wheels and mounts with a 4-bolt flange.
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- 10 x 2-1/4 Inch Drum
- Dexter
Replacement Inner Member for Dexter XR84 Actuator - Triple Axle w/ Disc - 2" Ball - 8.4K
This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Inner Member
- Dexter
Replacement Cap for Dexter Single Hydraulic Jack Add-On w/ Selector Valve 12,000 lbs
Replaces the protective top cap on Dexter 12,000-lb hydraulic jack add-on with selector valve; keeps internal components shielded from debris and moisture.
- Accessories and Parts
- Trailer Jack
- Electric Winch
- Caps
- Dexter
Replacement Hardware Kit for Curt Tow Bar Base Plate 70129
Replaces the mounting hardware for your Curt 70129 tow bar base plate. Restores secure fit on Jeep Gladiator JT.
- Accessories and Parts
- Tow Bar Base Plate
- Hardware
- CURT
Replacement 2-5/16" Ball for Curt TruTrack 2P Weight Distribution Hitch - 5K to 8K
Replace the ball on your Curt TruTrack 2P hitch with this 2-5/16" steel ball. Made for 5,000-lb to 8,000-lb systems only (17599), it bolts to the head and matches your system's capacity for safe, stable towing.
- Accessories and Parts
- Weight Distribution Hitch
- Balls
- CURT
Backing Plate for Single Axle Trailer Fender - 32" Long x 12" Tall - Qty 2
In Stock
Replace 2 worn or damaged backing plates on your single-axle trailer fender. Backing easily blocks water and road debris from hitting the side of your trailer.
- Accessories and Parts
- Trailer Fenders
- Fender Back
- CE Smith
CE Smith Trailer Coupler Latch Replacement - 2" Ball - 3,500 lbs and 5,000 lbs
In Stock
Coupler repair kit contains all needed replacement parts for your CE Smith straight-tongue coupler with a 3,500-lb or 5,000-lb capacity, except for the coupler housing.
- Accessories and Parts
- Straight Tongue Trailer Coupler
- Coupler Repair
- CE Smith
CE Smith Tail Light Bracket - Aluminum - 10" Wide x 4" Tall - Right Side
In Stock
If you're tired of steel brackets rusting out on your boat trailer, try this aluminum bracket. It's lightweight, durable, and won't rust, so your tail lights stay mounted season after season no matter where you launch.
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Brackets
- CE Smith
CE Smith Safety Travel Flag with Nylon Webbing
In Stock
This towing safety flag is ideal for your kayak, SUP, or anything else you want to tow and draw attention to. Made of Oxford fabric and nylon webbing, so it holds up for the long haul.
- Accessories and Parts
- Trailers
- Watersport Carriers
- Sports Trailer Parts
- Watersport Trailer Parts
- Safety Flag
- CE Smith
CE Smith Tail Light Bracket - Aluminum - 10" Wide x 3" Tall - Left Side
In Stock
If you're tired of steel brackets rusting out on your boat trailer, try this aluminum bracket. It's lightweight, durable, and won't rust, so your tail lights stay mounted season after season no matter where you launch.
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Brackets
- CE Smith
CE Smith Tail Light Bracket - Aluminum - 10" Wide x 3" Tall - Right Side
In Stock
If you're tired of steel brackets rusting out on your boat trailer, try this aluminum bracket. It's lightweight, durable, and won't rust, so your tail lights stay mounted season after season no matter where you launch.
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Brackets
- CE Smith
Replacement PVC Post for 22" C.E. Smith Pontoon Guide-On - 2-3/8" Dia - 18" L - White
Bring your guide-on back to life with this genuine replacement post for your 22" pontoon post guide-on setup. Made from durable, white PVC, it drops right onto your existing brackets to get you back on the water faster.
- Accessories and Parts
- Boat Trailer Parts
- Guide-On Parts
- Posts
- White
- CE Smith
CE Smith Tail Light Bracket - Aluminum - 10" Wide x 4" Tall - Left Side
In Stock
Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Brackets
- CE Smith