New Arrivals
Replacement Nut for DeeMaxx Disc Brake Brackets - 8K - Stainless Steel
In Stock
Replaces the stainless steel nut for your 8K DeeMaxx disc brake bracket. 1/2"-20
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Hardware
- Nuts
- DeeMaxx
DeeMaxx Trailer Wheel Lug Nut - Chrome - 5/8" - Qty 1
Need a solid replacement lug nut? This chrome acorn lug nut keeps your wheels snug and secure. The closed-end bulge design ensures a tight fit, while the chrome finish stands up to rust and road grime for the long haul.
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Tires and Wheels
- Golf Cart Tires and Wheels
- Wheel Lug Nut
- 5/8 Inch Wheel Bolt
- Acorn Nut
- 60-Degree Cone
- Chrome-Plated Steel
- DeeMaxx
DeeMaxx Drive-In Wheel Stud - 9/16" Diameter x 2-1/2" Long
In Stock
Grade 8 wheel stud fits DeeMaxx 13" hub-and-rotor assemblies, but its standard 9/16"-18 thread size will fit other hub assemblies just as well.
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 9/16 Inch Diameter
- Drive-In Stud
- DeeMaxx
DeeMaxx Braided Stainless Steel Hydraulic Brake Line, 3/16" Male Inverted Flares, 4'2"
In Stock
Need a tough, reliable connection from your caliper to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 4 Feet Long
- Brake Lines
- Brake Line Components
- DeeMaxx
Replacement Adjustable Cross Shaft for etrailer and Ram 5th Wheel Landing Gear - Qty 1
In Stock
Replaces the cross shaft on your etrailer or Ram fifth-wheel landing gear (RVLG-8000).
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Cross Shaft
- etrailer
etrailer Hitch Cargo Carrier Cage Kit for 24x60 Hitch-Mounted Carriers
In Stock
Trying to pack more without cramming your vehicle? If you've already got a bumper-mounted cargo carrier, this kit turns it into a lockable, front-loading cargo cage so extra bags or muddy gear can ride outside, covered and out of sight.
- Accessories and Parts
- RV Cargo Carrier
- Hitch Cargo Carrier
- Flat Carrier Parts
- Cargo Cage
- etrailer
Dexter Hydraulic Drum Brake Assembly w/ Parking Brake Lever - Duo Servo - 12-1/4" - Left Hand
In Stock
This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 10000 lbs
- 9000 lbs
- Brake Assembly
- 12-1/4 x 3-3/8 Inch Drum
- Dexter
Fortress Aluminum Threaded Cap Service Kit for 9-10K lb Dexter Axles
Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Service Kit
- Dexter
Harness Repair Kit for Dexter Tow Assist ABS System
In Stock
Kit helps repair your harness on your Dexter ABS tow system.
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- ABS System Wheel Sensor Parts
- Wiring Harness
- Repair Kit
- Dexter Axle
Replacement Wheel Speed Sensor for Dexter Tow Assist System
In Stock
Replaces your wheel sensor on your Dexter ABS tow system.
- Accessories and Parts
- Trailer Brakes
- ABS System Wheel Sensor Parts
- Electric Drum Brakes
- Sensors
- Dexter Axle
Replacement Inner Member Dexter A84 Actuator - Triple Axle w/Disc Brakes - 2-5/16" Ball - 8.4K
This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Inner Member
- Dexter
Replacement Dexter Axle 3-1/2" x 5/8"-18 Press-In Wheel Stud - Qty 1
In Stock
Replaces (1) 3-1/2" x 5/8"-18 Dexter Axle press-in wheel stud for 8K to 12K disc brakes or idler hubs with 5/8" studs.
- Accessories and Parts
- Trailer Hubs and Drums
- Boat Trailer Wheels
- Trailer Tires and Wheels
- Wheel Studs
- 5/8 Inch Diameter
- Drive-In Stud
- Dexter
Fortress Aluminum Threaded Cap Service Kit for 10K to 16K lb AL-KO and Rockwell Axles
Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Service Kit
- Dexter
Replacement Pivot Bushing Hardware Kit for Dexter Suspension Equalizers
Replace the pivot hardware in your Dexter suspension equalizer with this complete OEM kit. Includes bushings, bolts, locknuts, and instructions to restore quiet, reliable performance.
- Accessories and Parts
- Trailer Suspension Parts
- Hardware
- Dexter
Dexter Hydraulic Drum Brake Assembly - Free-Backing - 10" - Right Hand - 3,500 lbs
Passenger's-side 10" x 2-1/4" hydraulic drum brake assembly features a free-backing design for smooth reversing. Fits 3,500-lb axles with 13" to 15" wheels and mounts with a 4-bolt flange.
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- 10 x 2-1/4 Inch Drum
- Dexter
Replacement Cap for Dexter 12V KTI Hydraulic Pump Reservoirs - Qty 1
Replaces the cap for your Dexter 12V KTI hydraulic pump reservoir. Fits DC-4419 and DC45520.
- Accessories and Parts
- Dump Trailer Parts
- Hydraulic Pumps
- Caps
- Dexter Axle
Reverse Lockout Solenoid for Dexter and Tie Down Hydraulic Brake Actuators
Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Solenoid
- Dexter
Dexter Hydraulic Drum Brake Assembly w/ Parking Brake Lever - Duo Servo - 12-1/4" - Right Hand
In Stock
This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 10000 lbs
- 9000 lbs
- Brake Assembly
- 12-1/4 x 3-3/8 Inch Drum
- Dexter
Fortress Aluminum Threaded Cap Service Kit for 10K to 15K lb Dexter Axles
In Stock
Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Service Kit
- Dexter
Replacement Copper Crush Washer for Dexter Disc Brake Calipers - 7/16" Inner Diameter
Replace a worn or leaking copper washer on your Dexter disc brake caliper. This 7/16" crush washer provides a tight, reliable seal between the banjo fitting and caliper to help prevent brake fluid leaks in your hydraulic braking system.
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Hardware
- Caliper Parts
- Washers
- Dexter
Dexter Hydraulic Drum Brake Assembly - Free-Backing - 10" - Left Hand - 3,500 lbs
Driver's-side 10" x 2-1/4" hydraulic drum brake assembly features a free-backing design for smooth reversing. Fits 3,500-lb axles with 13" to 15" wheels and mounts with a 4-bolt flange.
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- 10 x 2-1/4 Inch Drum
- Dexter
Replacement Inner Member for Dexter XR84 Actuator - Triple Axle w/ Disc - 2" Ball - 8.4K
This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Inner Member
- Dexter
Replacement Cap for Dexter Single Hydraulic Jack Add-On w/ Selector Valve 12,000 lbs
Replaces the protective top cap on Dexter 12,000-lb hydraulic jack add-on with selector valve; keeps internal components shielded from debris and moisture.
- Accessories and Parts
- Trailer Jack
- Electric Winch
- Caps
- Dexter
Dexter Grease Zerks for E-Z Lube and Nev-R-Lube Axles - Press-In - 1/4" OD x 5/16" Long
In Stock
Keep your Dexter axle properly lubed with these press-in grease zerks. Designed for E-Z Lube and Nev-R-Lube axles, they let you easily attach a grease gun for routine maintenance. Measures 1/4" outer diameter x 5/16" length.
- Accessories and Parts
- Trailer Spindles
- Grease Zerk
- Dexter