New Arrivals

You're replacing a sun-faded, road-battered, barely sealed access hatch that's been holding on by a thread since your last trip. You pull it off, line up the new one, and it fits. Like it was made for your rig from the start. Because it was.

• RV Access Doors
• Multi-Purpose Hatch
• Rectangle
• Locking
• 6-1/4W x 5T Inch
• 5-1/2W x 4-1/8T Inch Cutout
• Gray
• B and B Molders

You're checking the base of the slide-out after a long weekend and notice the right-hand trim cap is gone. The open end is collecting dirt and giving water a way in. This replacement screws into place to cover the opening and matches your trim.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

Driving a big vehicle means you can't afford to guess what's in your blind spots. With four cameras and a recording monitor, this system gives you a clear view around your entire rig and video proof if something goes wrong on the road.

• Backup Camera
• Backup Camera Systems
• Side Mount Camera System
• Hardwired
• 170 Degrees
• Dash Monitor
• Brandmotion

Maintain and protect your RV by installing this trim piece to cover the front top corner seam on the right hand side. ed to be a direct match for your 5.5" long factory part, it is easy to install and won't fade from UV exposure.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

Sturdy steel ball mount with a solid shank measures 7-1/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish is corrosion resistant.

• Trailer Hitch Ball Mount
• Drop Hitch
• Fixed Ball Mount
• No Ball
• Steel Shank - Gloss Black
• Rise - 5 Inch
• Drop - 6 Inch
• 3500 lbs GTW
• Brophy

Durable plastic floor vent directly replaces a worn or damaged RV floor register in your RV. Fixed ribs are angled to provide consistent and steady airflow to keep your RV comfortable. Rated for up to 200 lbs per square inch.

• RV Vents and Fans
• Vent
• Floor Vent
• No Fan
• Plastic
• Gray
• B and B Molders

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Black
• B and B Molders

The rain starts to fall, and you don't even flinch. Thats how it should be. This little splice makes sure the flow keeps going. No drips from the seams or streaks down the side. Just water headed where it's supposed to go.

• RV Trim
• Gutter Parts
• Black
• B and B Molders

RV range vent made to withstand regular kitchen use and travel conditions you face on your adventures. With a low profile design and secure latching mechanism, this vent is often chosen as an upgrade for direct replacement. Won't crack or fade.

• RV Vents and Fans
• Range Hood
• Wall Vent
• No Fan
• Plastic
• Black
• B and B Molders

Durable plastic floor vent directly replaces a worn or damaged RV floor register in your RV. Dial-type damper and angled, fixed ribs provide controlled, consistent, and steady airflow to keep your RV comfortable. Rated for 200 lbs per square inch.

• RV Vents and Fans
• Vent
• Floor Vent
• No Fan
• Plastic
• Beige
• B and B Molders

Direct water away from your RV with this long-length gutter spout that drains water farther away from your RV, avoiding those unsightly black streaks. Fits all rain gutter rails up to 1-1/16" wide. Easy to install.

• RV Trim
• Gutter Parts
• Gray
• B and B Molders

You're walking around your rig and spot the end of the trim line sticking out. The cap is missing, leaving the edge exposed to water and road spray. This return-style end cap with a molded step finishes off the run and blends in with your trim.

• RV Slide Out Parts
• Caps and Covers
• End Cap
• Bolt-On
• Gray
• B and B Molders

It's not the flashiest part of your rig, but it's necessary. This vent cover keeps air moving and water out, so the inside stays fresh, no matter what's happening outside. You'll forget it's there. That's exactly the point.

• RV Vents and Fans
• Vent Cover
• Plumbing Vent
• Plastic
• Black
• B and B Molders

Easily adjust warm or cool airflow in your RV to keep comfortable. Use the rotating grille and damper to direct and control flow. Simple to install with 5" duct in walls or ceiling with 5-1/4" cutout. Screws are visible when installed.

• RV Vents and Fans
• Vent
• Wall Vent
• Ceiling Vent
• No Fan
• Plastic
• White
• B and B Molders

Maintain your RV with a new locking RV hatch with a gravity fill fresh-water inlet. Barbed spout connector fits 1-1/4" or 1-3/8" hose. Built-in vent balances tank air for smooth flow via 3/8" tubing (not included).

• RV Water Inlets
• Gravity Fill Inlet
• Flush Mount
• 2-3/4 Inch Deep
• Plastic
• Brass
• Black
• B and B Molders

Change out a failed RV plastic check valve with this surface mounted city water inlet. The integrated inlet and valve are lead-free and have a 1/2" MPT water connection. Removable screen filter keeps debris out of your water system.

• RV Water Inlets
• City Fill Inlet
• Surface Mount
• 1-1/2 Inch Diameter Cutout
• 1-11/16 Inch Deep
• Plastic
• Plastic
• Black
• B and B Molders

You're checking the inside corner of the slide-out and spot the trim joint exposed. The cover's missing, and now there's a gap catching dust and grime. This replacement covers it up and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Inside Corner
• Bolt-On
• White
• B and B Molders

It's stressful when your vehicle is packed to the roof and you can't see what's going on behind you. This digital rear view mirror restores that view and records video, so if anything happens, you've got proof to protect yourself.

• Backup Camera
• Backup Camera Systems
• Third Brake Light Camera System
• Hardwired
• 170 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

Improve the look of your RV's slide-out with this molded plastic cover. The arrow shape adds protection to the corner edge of your slide-out cap. The hooked lip edges of the arrow tip and single screw hole make installing easy.

• RV Slide Out Parts
• Caps and Covers
• Straight Arrow Corner
• Bolt-On
• White
• B and B Molders

If you back into a parking spot or try to merge in city traffic, you might hold your breath and hope nothing was hiding out of sight. This system gives you a 360º view, so you can see every angle to change lanes and park your rig safely.

• Blind Spot Detection
• Trucks
• Blind Spot Detection
• HD Video
• Brandmotion

It's stressful when your vehicle is packed to the roof and you can't see what's going on behind you. This digital rear view mirror restores that view and records video, so if anything happens, you've got proof to protect yourself.

• Backup Camera
• Backup Camera Systems
• Standard Camera System
• Hardwired
• 155 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Beige
• B and B Molders

You can't stop the rain, but you can control where it goes. These gutter spouts guide water away from your rig so it doesn't leave streaks down the side or puddles by the door. A small fix that makes a clear difference when the weather turns.

• RV Trim
• Gutter Parts
• White
• B and B Molders

A BedRug truck-bed mat upgrades the floor of your vehicle bed to a 1/2" thick, slip-resistant, carpet-like surface that cushions and protects fragile loads, helps prevent skidding cargo, and still offers a heavy-duty work surface for rugged use.

• Truck Bed Mats
• Custom-Fit Mat
• Trucks w Drop-In Liners
• 1/2 Inch Thick
• Bed Floor Protection
• BedRug