New Arrivals

You're checking under the slide-out and notice the right-side drip pan is missing. Now water has a direct path to the underbelly and trim. This replacement pan fits snug at the floor corner and helps steer runoff away from the RV.

• RV Slide Out Parts
• Caps and Covers
• Drip Pan
• Bolt-On
• Black
• B and B Molders

You can't see every angle in a box truck or work van, but now you don't have to guess. These radar sensors watch your blind spots and cross-traffic so you get alerts before danger sneaks up. You get the heads-up you need to move safely.

• Blind Spot Detection
• Trucks
• Blind Spot Detection
• Audio Alert
• LED Indicators
• Brandmotion

Maintain your RV and keep it looking new with a replacement square cap for your slide-out room. Simple to identify by the square shape with a 3-corner hole pattern, the direct fit also resists impact and won't fade from UV exposure.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Black
• B and B Molders

Quickly and easily connect your RV or camper water and AV needs when you arrive on site. Control your water system for filling, sanitizing, and winterizing with simple diverter valves. Match up your current Nautilus with this direct replacement.

• Smart RV
• Management System
• Monitoring System
• Water Pumps
• Water Tanks
• B and B Molders

It's stressful when your vehicle is packed to the roof and you can't see what's going on behind you. This digital rear view mirror restores that view and records video, so if anything happens, you've got proof to protect yourself.

• Backup Camera
• Backup Camera Systems
• Standard Camera System
• Hardwired
• 170 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Gray
• B and B Molders

Recessed plastic pocket door handle is a considered a direct replacement and can also be used with a new RV pocket door. The universal fit requires a 2-7/64" diameter cutout for press-in installation. Secures behind door panel with molded tabs.

• RV Door Parts
• Pocket Door
• Handles
• Black
• B and B Molders

Tucked into the wall and sealed up tight, this docking station keeps your hookups organized and out of sight. Flip the door, hook up, and you'refree to kick back - your campsite setup just got way easier.

• RV Water Inlets
• City Fill Inlet
• Recessed Mount
• 3-3/4 Inch Deep
• Plastic
• Black
• B and B Molders

Install this locking multi-purpose hatch on your RV's exterior to create a secure access point. The plastic hatch consists of a mounting flange with a 1-1/8" collar and door. There is no back plate to limit you. Comes with lock and key.

• RV Access Doors
• Multi-Purpose Hatch
• Rectangle
• Locking
• 12-5/8W x 7-3/4T Inch
• 11-1/16W x 6T Inch Cutout
• White
• B and B Molders

Store your 4" RV sewage hose where you have space with this exterior hatch. Attach PVC pipe or flex hose (not included) to the collar behind the hatch to extend your storage as needed. Thumb lock keeps the door closed.

• RV Access Doors
• Sewer Hose Hatch
• Rectangle
• 7-5/8W x 6-1/2T Inch
• 5-7/8W x 4-3/4T Inch Cutout
• Black
• B and B Molders

You're walking up to the front of your 5th wheel and spot the trim corner exposed. The cover is gone, and now the seam is open to moisture and road spray. This replacement screws into place to finish off the edge and match your front-end trim.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

Electric cable RV hatch with 2-3/8" depth collar for electrical cords up to 50 amp size. Open back area makes it easier when passing through your larger plugs. Sliding access door prevents critters from entering when not in use.

• RV Access Doors
• Electrical Cable Hatch
• Round
• 5-1/8 Inch Diameter
• 3-1/2 Inch Diameter Cutout
• Black
• B and B Molders

You're replacing a sun-faded, road-battered, barely sealed access hatch that's been holding on by a thread since your last trip. You pull it off, line up the new one, and it fits. Like it was made for your rig from the start. Because it was.

• RV Access Doors
• Multi-Purpose Hatch
• Rectangle
• Locking
• 8-7/8W x 6-1/2T
• 5-7/8W x 4-3/4T Inch Cutout
• White
• B and B Molders

Standard key lock replaces 1 worn or damaged lock on your RV compartment door. Direct replacement for 1-1/8" cylinder length lock with generic key code 391. Chrome-plated zinc lock with offset blade.

• RV Door Locks
• Compartment Door
• Cam Locks
• Keyed Alike
• Offset Cam
• 1-1/8 Inch Long
• Silver
• B and B Molders

You're checking the base of the slide-out after a long weekend and notice the right-hand trim cap is gone. The open end is collecting dirt and giving water a way in. This replacement screws into place to cover the opening and matches your trim.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

Maintain your RV and keep it looking new with a replacement square cap for your slide-out room. Simple to identify by the square shape with a 3-corner hole pattern, the direct fit also resists impact and won't fade from UV exposure.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Tan
• B and B Molders

It's stressful when your vehicle is packed to the roof and you can't see what's going on behind you. This digital rear view mirror restores that view and records video, so if anything happens, you've got proof to protect yourself.

• Backup Camera
• Backup Camera Systems
• Standard Camera System
• Hardwired
• 170 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

Enjoy the ease of a central docking point for your RV or camper when arriving on site. The Titus T1 handles your water system needs with fill and flush options and provides your AV connections. Directly replaces identical original equipment.

• RV Water Inlets
• City Fill Inlet
• Flush Mount
• Plastic
• Black
• B and B Molders

Easily adjust warm or cool airflow in your RV to keep comfortable. Use the rotating grille to control directional flow. Simple to install with 4" duct in walls or ceiling with 4-1/8" cutout. Installed grille covers mounting screws.

• RV Vents and Fans
• Vent
• Floor Vent
• Wall Vent
• Ceiling Vent
• No Fan
• Plastic
• White
• B and B Molders

Direct water away from your RV with this extended gutter spout that directs water farther away from your RV, avoiding those unsightly black streaks. Fits all rain gutter rails up to 1-3/8" wide, including awning profile rails.

• RV Trim
• Gutter Parts
• Black
• B and B Molders

You're walking around your rig and notice the trim ends suddenly on the left side. No cap, just an exposed edge catching dirt and water. This replacement seals it up and finishes the run so it actually looks like it came that way.

• RV Slide Out Parts
• Caps and Covers
• End Cap
• Bolt-On
• Black
• B and B Molders

Mount it outside your RV or in your wet bay and hit the ground running - this panel keeps all your water and cable hookups in one spot with capped ports to keep things clean. Less fiddling, more chilling.

• RV Water Inlets
• City Fill Inlet
• Flush Mount
• Plastic
• Black
• B and B Molders

Install this locking multi-purpose hatch on your RV's exterior to create a secure access point. The plastic hatch consists of a mounting flange (no collar), and door. There is no back plate to limit you. Keyed-alike lock cylinder is replaceable.

• RV Access Doors
• Multi-Purpose Hatch
• Rectangle
• Locking
• 8W x 8-1/2T Inch
• 6-3/8W x 6-7/8T Inch Cutout
• White
• B and B Molders

Diverter valve assembly allows you to manage a fresh water flow into your water heater. It is used for winterizing and storage. Set the lever to bypass water from entering the hot water tank so you can use antifreeze without damaging it.

• RV Fresh Water
• Winterization
• Valves
• Plastic
• Bypass Valve
• 1/2 Inch PEX
• B and B Molders