New Arrivals

Snap-on style ceiling cooling vent has an integrated grille cover-damper that rotates 360 degrees. Balance your RV's air conditioning output to be comfortable in any space. Mounts directly in some ceiling AC units, or with included flange.

• RV Vents and Fans
• Vent
• Ceiling Vent
• Wall Vent
• No Fan
• Plastic
• White
• B and B Molders

Direct water away from your RV with this long-length gutter spout that drains water farther away from your RV, avoiding those unsightly black streaks. Fits all rain gutter rails up to 1-1/16" wide. Easy to install.

• RV Trim
• Gutter Parts
• White
• B and B Molders

You're walking around your rig and spot the end of the trim line sticking out. The cap is missing, leaving the edge exposed to water and road spray. This return-style end cap with a molded step finishes off the run and blends in with your trim.

• RV Slide Out Parts
• Caps and Covers
• End Cap
• Bolt-On
• Black
• B and B Molders

You've parked for the night and just want to relax. This ceiling vent sets the tone, letting you adjust both direction and airflow, so your space feels just right. One small change, and your RV feels more like home.

• RV Vents and Fans
• Vent
• Ceiling Vent
• No Fan
• Plastic
• Beige
• B and B Molders

Mount it outside your RV or in your wet bay and hit the ground running - this panel keeps all your water and cable hookups in one spot with capped ports to keep things clean. Less fiddling, more chilling.

• RV Water Inlets
• City Fill Inlet
• Flush Mount
• Plastic
• Black
• B and B Molders

Manage your RV electrical cables or cords with this cable hatch. Small access door allows cords to be used while the door is shut and sits flush when not in use. Comes with hinged thumb lock, but can be replaced with a metal lock core and key.

• RV Access Doors
• Electrical Cable Hatch
• Rectangle
• 6W x 6-1/2T Inch
• 4-1/4W x 4-3/4T Inch Cutout
• White
• B and B Molders

B&B's Flusher system for RV wastewater tanks is designed to use pressurized city water to rinse out your black-water tank. Using a specific city fill inlet for cleaning decreases risk of bacterial contamination and reduces tank build-up.

• RV Black Tank Cleaner
• Black Water Tanks
• Tank Rinsers
• B and B Molders

You're checking the top rear seam of the slide-out and notice the trim corners exposed. The caps missing and now water or road spray can sneak in. This replacement screws into place and finishes off the joint while blending with the trim.

• RV Trim
• Plastic Molding
• White
• B and B Molders

Maintain and protect your RV by installing this trim piece to cover the front top corner seam on the right hand side. ed to be a direct match for your 10" long factory part, it is easy to install and won't fade from UV exposure.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

Install a new locking RV hatch with a gravity fill fresh-water inlet to replace a failed unit. Barbed spout connector fits 1-1/4" or 1-3/8" hose. Built-in vent balances tank air for smooth flow via 3/8" tubing (not included).

• RV Water Inlets
• Gravity Fill Inlet
• Flush Mount
• 1-1/2 Inch Deep
• Plastic
• White
• B and B Molders

Change out a failed RV brass check valve with this surface mounted city water inlet. The integrated inlet and valve are lead-free and have a 1/2" MPT water connection. Removable screen filter keeps debris out of your water system.

• RV Water Inlets
• City Fill Inlet
• Surface Mount
• 1-1/2 Inch Diameter Cutout
• 1-11/16 Inch Deep
• Plastic
• Brass
• White
• B and B Molders

You've dealt with the smell, the mess, and the hose dragging across everything in the storage bay. You cut a hole for the hatch, drop the hose in, and close it up. Now it's contained, easy to reach, and not touching anything it shouldn't.

• RV Access Doors
• Sewer Hose Hatch
• Rectangle
• Locking
• 7-5/8W x 6-1/2T Inch
• White
• B and B Molders

You're walking around your rig and spot the trim on the slide-out. The arrow cover's missing, and the cutout is exposed. This replacement arrow cover seals it up, keeps debris out, and sticks on with pre-applied tape.

• RV Slide Out Parts
• Caps and Covers
• Straight Arrow Corner
• Tape-On
• Black
• B and B Molders

It's stressful when your vehicle is packed to the roof and you can't see what's going on behind you. This digital rear view mirror restores that view and records video, so if anything happens, you've got proof to protect yourself.

• Backup Camera
• Backup Camera Systems
• Third Brake Light Camera System
• Hardwired
• 170 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

Improve the cosmetic appearance of your RV's slide-out room with this molded plastic cover. The 4-1/2" curved cover has cap edges to protect the corner and prevent water from entering where the trim panels meet. Easy to install.

• RV Slide Out Parts
• Caps and Covers
• Curved Corner
• Bolt-On
• White
• B and B Molders

Ventilate and balance air pressure in your RV's black tank with this exterior mounted vent system. The PowerVent base attaches to flex hose from your tank, and the PowerVent hood slides down over the base, allowing tank air to escape.

• RV Vents and Fans
• Vent
• Plumbing Vent
• No Fan
• Plastic
• Black
• B and B Molders

Set-up your RV's black water tank with this flush slip fitting. The fitting is designed for solvent welding to your tank once a hole is drilled. Your fitting requirements are dictated by your water set-up. Made with durable ABS plastic.

• RV Sewer Hose Fittings
• Sewer Seals and Gaskets
• Waste Tank
• B and B Molders

Towing a trailer means you can't afford to guess what's behind you. This custom fit system puts live views of your bed and trailer on a digital rear view mirror, so you always know what's back there before you change lanes or park.

• Backup Camera
• Backup Camera Systems
• Third Brake Light Camera System
• Wireless
• 155 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

It's stressful keeping track of what's behind your work van on the road or backing out of a crowded loading dock. This digital rear view mirror restores that view and constantly records video, so if anything happens, you've got proof.

• Backup Camera
• Backup Camera Systems
• Standard Camera System
• Hardwired
• 170 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• White
• B and B Molders

You settle in, the air's just right, and everything feels still. That's no accident. This ceiling vent helps shape the comfort around you, quietly guiding airflow where it belongs so your space feels calm, even after a long day on the road.

• RV Vents and Fans
• Vent
• Ceiling Vent
• No Fan
• Plastic
• White
• B and B Molders

Manage your RV electrical cables or cords with this cable hatch. Small access door allows cords to be used while the door is shut and sits flush when not in use. Comes with hinged thumb lock, but can be replaced with a metal lock core and key.

• RV Access Doors
• Electrical Cable Hatch
• Rectangle
• 8W x 8-1/2T Inch
• 6-3/8W x 6-7/8T Inch Cutout
• White
• B and B Molders

Replace a failed RV brass check valve with this recessed dish mount city water inlet. The integrated inlet and valve are lead-free and have a 1/2" MPT water connection. Removable screen filter keeps debris out of your water system.

• RV Water Inlets
• City Fill Inlet
• Recessed Mount
• 3-1/2 Inch Diameter Cutout
• 2-1/2 Inch Deep
• Plastic
• Brass
• White
• B and B Molders

You're filling the fresh tank before a long weekend and your original water hatch is cracked, loose, and barely hanging on. You know it's time for a new one. This kit has everything you need to swap it out and get ready for the next trip.

• RV Water Inlets
• Gravity Fill Inlet
• Flush Mount
• Plastic
• Black
• B and B Molders