New Arrivals

Add this bracket to your 2022 or newer V6 Ford Ranger or Raptor to ensure your Redarc BCDC has plenty of airflow to keep it cool so it can keep your batteries charged. Mounts with included installation hardware.

• Accessories and Parts
• Battery Charger
• Mounting Hardware
• Brackets
• Redarc

If your start battery and secondary battery are close to each other in your engine bay, this wiring kit gives you everything you need to make connections with your Redarc Alpha 25A DC battery charger.

• Accessories and Parts
• Battery Charger
• Cables
• Side-by-Side Wiring Cable
• Redarc

Got a rear-vehicle setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 21"4" apart. Made for the Redarc BCDC Alpha 50A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

If your start battery and secondary battery are at opposite sides of your engine bay, this wiring kit gives you everything you need to make connections with your Redarc Alpha 25A DC battery charger.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

The PowerDock secures your GoBlock, charges it fast, and simplifies setup. Lock your GoBlock in, hit the trail, and pop the quick-release handle to go portable. With solar priority and anti-theft features, it's ready for any adventure!

• Accessories and Parts
• Portable Chargers
• Docking Station
• Redarc

Got a mid-vehicle battery setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 14'9" apart. Made for the Redarc BCDC Alpha 50A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Got a mid-vehicle battery setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 14'9" apart. Made for the Redarc BCDC Alpha 25A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Need to get your PowerDock wired up for your next adventure? This kit makes it easy with color-coded cables, tough hardware, and room to customize. It's built for rough trails, so you can get set up and get going in no time!

• Accessories and Parts
• Portable Chargers
• Cables and Cords
• Redarc

Got a rear-vehicle setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 21"4" apart. Made for the Redarc BCDC Alpha 25A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Beach, campsite, or worksite - take your adventures off-grid! This all-in-one kit makes connecting your PowerDock a cinch. Hook up solar panels, power up anywhere, and rely on rugged Aussie durability to tackle the wild.

• Accessories and Parts
• Portable Chargers
• Cables and Cords
• Redarc

Got batteries close together? This kit has pre-crimped cables, fuses, and connectors for batteries less than 5' apart. Made for the Redarc BCDC Alpha 50A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Power your adventures with the GoBlock Inverter Connector Cable! Effortless, plug-and-play connection to your 400W Redarc inverter keeps you charged up, off-grid, and ready for the wild. Built tough, so you can explore worry-free!

• Accessories and Parts
• Portable Chargers
• Cables and Cords
• Redarc

Add this bracket to your 2008 or newer Toyota Landcruiser 200 to ensure your Redarc BCDC has plenty of airflow to keep it cool so it can keep your batteries charged. Mounts with included installation hardware.

• Accessories and Parts
• Battery Charger
• Mounting Hardware
• Brackets
• Redarc

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Rota-Flex pin boxes with skid plates that are 13-3/8" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Rota-Flex pin boxes with skid plates that are 13-5/8" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This fits Lippert Rhino Box pin boxes with skid plates that are 7-3/8" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Rhino Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required to tow with the SuperGlide. This plate fits Lippert 1621, 1116, and 1716 pin boxes with 13-1/4" wide skid plates.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

This adapter attaches to the factory, underbed fifth wheel towing prep package receivers in your vehicle. The base provides the attachment point for your 5th-wheel hitch with industry standard tabbed feet. Modular design allows for easy removal.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Custom
• Pullrite

This adapter attaches to the factory, underbed 5th-wheel prep package receivers in your vehicle so that you can use your PullRite SuperGlide hitch that normally attaches to industry-standard rails (2700 or 2900).

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Custom
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Reese 5th Airborne pin boxes with skid plates that are 12" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• 5th Airborne Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Fabex pin boxes with skid plates that are 12" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Fabex Pin Box
• Pullrite

Tow your trailer with confidence using this PullRite capture plate, designed for Lippert Helux pin boxes. It locks the king pin to ensure smooth tracking with SuperGlide hitches, preventing unwanted rotation and enhancing towing safety.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Helux
• Pullrite

This adapter attaches to the factory, underbed fifth wheel towing prep package receivers in your vehicle. The base provides the attachment point for your 5th-wheel hitch with industry standard tabbed feet. Modular design allows for easy removal.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Custom
• Pullrite

Replaces the base for your PullRite ISRX Super or SuperLite 5th-wheel hitch for industry-standard rails. Rated for 24,000 lbs gross towing weight.

• Accessories and Parts
• 5th Wheel Hitch
• Base
• Pullrite