New Arrivals

You're walking the RV and spot a missing trim cap at the corner seam. The edge is exposed, and water's got a straight shot in. This left-hand cover replaces the missing piece, blocks out debris, and finishes off the trim.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

Molded body trim piece that covers the top rear corner of your RV's slide-out room to protect the raw top edges of the two walls. 1-Piece molded, with 2 screw holes that replaces the corner cap that came standard on your RV.

• RV Slide Out Parts
• Caps and Covers
• Top Rear Corner
• Bolt-On
• Black
• B and B Molders

It's stressful when your vehicle is packed to the roof and you can't see what's going on behind you. This digital rear view mirror restores that view and records video, so if anything happens, you've got proof to protect yourself.

• Backup Camera
• Backup Camera Systems
• Spare Tire Camera System
• Hardwired
• 170 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

Get your RV or camper docking needs set up quickly with this water and AV management panel. Control your water system for filling, sanitizing, and winterizing with simple levers. Match up your current Nautilus with this direct replacement.

• Smart RV
• Monitoring System
• Management System
• Water Tanks
• Water Pumps
• Light indicator
• B and B Molders

Sleek ceiling vent with an integrated grille cover-damper that rotates 360 degrees gives you full airflow control. Balance your RV's air conditioning output to be comfortable in any space. Mounting screws are covered for the cleanest look.

• RV Vents and Fans
• Vent
• Wall Vent
• Ceiling Vent
• No Fan
• Plastic
• White
• B and B Molders

Direct water away from your RV with this flexible, long length gutter spout that drains water farther away from your RV, avoiding those unsightly black streaks. Fits all rain ggutter rails up to 1-1/16" wide. Easy to install.

• RV Trim
• Gutter Parts
• White
• B and B Molders

You're walking around your rig and spot the trim line ending bare. No cover, just an open edge collecting dirt and water. This molded end cap slides over the extrusion and sits flush for a clean, finished look.

• RV Slide Out Parts
• Caps and Covers
• End Cap
• Bolt-On
• Black
• B and B Molders

You've parked for the night and just want to relax. This ceiling vent sets the tone, letting you adjust both direction and airflow, so your space feels just right. One small change, and your RV feels more like home.

• RV Vents and Fans
• Vent
• Ceiling Vent
• No Fan
• Plastic
• White
• B and B Molders

Mount it outside your RV or in your wet bay and hit the ground running - this panel keeps all your water and cable hookups in one spot with capped ports to keep things clean. Less fiddling, more chilling.

• RV Water Inlets
• City Fill Inlet
• Flush Mount
• Plastic
• Black
• B and B Molders

Create covered access for your fuel fill with this RV fuel hatch. The full back allows you to align 1 or more fills by drilling your own hole or holes. Plastic thumb turn lock can be replaced with a keyed-alike lock cylinder.

• RV Access Doors
• Multi-Purpose Hatch
• Rectangle
• 7-5/8W x 6-1/2T Inch
• 5-7/8W x 4-3/4T Inch Cutout
• Black
• B and B Molders

B&B's Flusher system for RV wastewater tanks is designed to use pressurized city water to rinse out your black-water tank. Using a specific city fill inlet for cleaning decreases risk of bacterial contamination and reduces tank build-up.

• RV Black Tank Cleaner
• Black Water Tanks
• Tank Rinsers
• B and B Molders

You're checking the top rear seam of the slide-out and notice the trim corners exposed. The caps missing and now water or road spray can sneak in. This replacement screws into place and finishes off the joint while blending with the trim.

• RV Trim
• Plastic Molding
• White
• B and B Molders

Maintain and protect your RV by installing this trim piece to cover the front top corner seam on the left-hand side. ed to be a direct match for your 10" long factory part, it is easy to install and won't fade from UV exposure.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

Install a new locking RV hatch with a gravity fill fresh-water inlet to replace a failed unit. Barbed spout connector fits 1-1/4" or 1-3/8" hose. Built-in vent balances tank air for smooth flow via 3/8" tubing (not included).

• RV Water Inlets
• Gravity Fill Inlet
• Flush Mount
• 1-1/2 Inch Deep
• Plastic
• Black
• B and B Molders

Install this locking multi-purpose hatch on your RV's exterior to create a secure access point. The plastic hatch consists of a mounting flange with a 1-1/2" collar and door. There is no back plate to limit you. Comes with lock and key.

• RV Access Doors
• Multi-Purpose Hatch
• Rectangle
• Locking
• 7-5/8W x 6-1/2T Inch
• 5-7/8W x 4-3/4T Inch Cutout
• White
• B and B Molders

You've dealt with the smell, the mess, and the hose dragging across everything in the storage bay. You cut a hole for the hatch, drop the hose in, and close it up. Now it's contained, easy to reach, and not touching anything it shouldn't.

• RV Access Doors
• Sewer Hose Hatch
• Rectangle
• 8W x 6-1/2T Inch
• White
• B and B Molders

You're walking around your rig and spot the lower corner of the slide-out. The cap is cracked, so the edge is exposed and there is nothing sealing it from water or road debris. This angled bottom cap fixes it before it becomes a problem.

• RV Slide Out Parts
• Caps and Covers
• Angled Bottom
• Bolt-On
• Black
• B and B Molders

It's stressful when your vehicle is packed to the roof and you can't see what's going on behind you. This digital rear view mirror restores that view and records video, so if anything happens, you've got proof to protect yourself.

• Backup Camera
• Backup Camera Systems
• Standard Camera System
• Hardwired
• 155 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

Keep your RV protected and looking new with this direct replacement square cap for your slide-out room. Simple to identify by the square shape with a 3-corner hole pattern, this cap also resists impact and won't fade from the sun.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Black
• B and B Molders

Set-up your RV's black water tank with this flush slip fitting. The fitting is designed for solvent welding to your tank once a hole is drilled. Your fitting requirements are dictated by your water set-up. Made with durable ABS plastic.

• RV Sewer Hose Fittings
• Sewer Seals and Gaskets
• Waste Tank
• B and B Molders

Towing a trailer means you can't afford to guess what's behind you. This custom fit system puts live views of your bed and trailer on a digital rear view mirror, so you always know what's back there before you change lanes or park.

• Backup Camera
• Backup Camera Systems
• Third Brake Light Camera System
• Wireless
• 155 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

It's stressful when your vehicle is packed to the roof and you can't see what's going on behind you. This digital rear view mirror restores that view and records video, so if anything happens, you've got proof to protect yourself.

• Backup Camera
• Backup Camera Systems
• Standard Camera System
• Hardwired
• 170 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

A dead battery is the last thing you need on a busy day. This wireless charging pad keeps your phone powered up whenever you hit the road. No more fumbling with cables while you're driving. Just drop your phone on the pad and keep moving.

• Portable Chargers
• In-Vehicle Charger
• Wireless Charging
• USB Cable Not Included
• Brandmotion

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• White
• B and B Molders