New Arrivals

Replace the lost or damaged cable anchor in your Demco Stay-in-Play DUO or Air Force One system. Includes set screw to secure the cable in place and restore your systems function.

• Accessories and Parts
• Flat Tow Brake System
• Hardware
• Anchors
• Demco SBS

Replaces a worn or missing ramp bushing on your Demco Kar Kaddy SS tow dolly. This bushing ensures proper spacing, allowing the ramp to tilt up for storage and secure in lowered position for loading.

• Accessories and Parts
• Trailers
• Hardware
• Bushings
• Demco

Replaces the pull pin on the breakaway switch that came with your Demco Air Force One (9599007, 9599019, 9599020, or 9599021) or Stay-IN-Play Duo (SM99251 or SM99243) supplemental braking system.

• Accessories and Parts
• Flat Tow Brake System
• Breakaway Kit
• Switches
• Demco

If you're tired of your trailer brakes locking when you back up, this hand activated reverse lockout stops the surge actuator from applying the brakes. It installs directly on any Demco DA75 actuator with no electrical hookup required.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Reverse Lockout
• Demco

Demco's eZ-Latch coupler latch is now available for your gooseneck trailer! This gooseneck coupler head assembly welds onto the stem of your trailer.

• Accessories and Parts
• Gooseneck Coupler
• Head
• Demco

Replaces a key for your Inno roof rack, bike rack, or cargo box. Key number T256.

• Accessories and Parts
• Roof Rack
• Keys
• Inno

Replaces the surge protection module for your second generation 50-amp Hughes Watchdog surge protector (PWD50EPOW).

• Accessories and Parts
• RV Surge Protectors
• Surge Module
• 50 Amp
• Hughes Autoformers

Replaces the surge protection module for your second generation 30-amp Hughes Watchdog surge protector (PWD30EPOW).

• Accessories and Parts
• RV Surge Protectors
• Surge Module
• 30 Amp
• Hughes Autoformers

Replaces a brass bleed port on your Hydrastar caliper. Designed for use with Hydrastar disc brake systems.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Bleed Valve
• Hydrastar

Replaces the ceramic brake pads for your Hydrastar disc brakes with 225 calipers. Works with 303-E36C and 303-E36CSS calipers. Includes 4 brake pads.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Brake Pads
• Hydrastar

Got a factory tow package but haven't wired in your brake controller yet? No need to slice and splice. This adapter connects your Hopkins controller to the dash port. Setup is quick, easy to remove, and ready to tow or transfer to another ride.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• Hopkins

Worn brake hoses reduce stopping power. This DOT-approved Kodiak hose seals tight for leak-proof braking and resists rust for long-lasting performance. Dead swivel ends prevent twisting during installation. Works with any 3/16" brake lines.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• 4 Feet Long
• Brake Lines
• Brake Line Components
• Kodiak

Replace the spacer on your Kodiak K71-2R-11-10D-DDDD disc brake kit. Designed for 11" rotors with an 8 on 6-1/2" bolt pattern and 5/8" studs, it restores fit and function for your 10,000-lb axle, keeping disc brakes working smoothly.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 10000 lbs
• Rotors
• Rotor Spacers
• Kodiak

Worn brake hoses reduce stopping power. This DOT-approved Kodiak hose seals tight for leak-proof braking and resists rust for long-lasting performance. Dead swivel ends prevent twisting during installation. Works with any 3/16" brake lines.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• 26 Feet Long
• Brake Lines
• Brake Line Components
• Kodiak

Caliper-mounting bracket is designed for use with 11.6" hub-and-rotor assemblies that have an 8 on 6-1/2 bolt pattern and 5/8" wheel bolts. Works with dually applications and mounts on 7-bolt, 10,000-lb Dexter brake flanges.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 10000 lbs
• Hardware
• Caliper Parts
• Mounting Brackets
• Kodiak

Replaces 2 caliper retaining clips and 2 retaining clip bolts on your Kodiak DBC-338-HD calipers.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Bolts
• Kodiak

These snap-in blue inserts add a bold accent to your AM06 trailer wheel. They fit cleanly into the spokes for a custom look without paint or tools. A quick, easy way to give your trailer a more personalized, standout appearance.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Wheel Trim
• Color Inserts
• Blue
• Kenda

These snap-in red inserts add a bold accent to your AM06 trailer wheel. They fit cleanly into the spokes for a custom look without paint. A quick, easy way to give your trailer a more personalized, standout appearance.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Wheel Trim
• Color Inserts
• Red
• Kenda

These snap-in blue inserts add a bold accent to your AM06 trailer wheel. They fit cleanly into the spokes for a custom look without paint or tools. A quick, easy way to give your trailer a more personalized, standout appearance.

• Accessories and Parts
• Trailer Tires and Wheels
• Boat Trailer Wheels
• Wheel Trim
• Color Inserts
• Blue
• Kenda

These snap-in red inserts add a bold accent to your AM06 trailer wheel. They fit cleanly into the spokes for a custom look without paint or tools. A quick, easy way to give your trailer a more personalized, standout appearance.

• Accessories and Parts
• Trailer Tires and Wheels
• Boat Trailer Wheels
• Wheel Trim
• Color Inserts
• Red
• Kenda

Replaces a key for your Inno roof rack, bike rack, or cargo box. Key number T252.

• Accessories and Parts
• Hitch Bike Racks
• Roof Bike Racks
• Roof Rack
• Roof Box
• Keys
• Inno

Heavy-duty, stainless steel locks provide superior security when locking your B&W hitch step to your B&W Tow and Stow 2" or 2-1/2" ball mount. Third-party-tested pin has a 42,000-lb shear strength.

• Accessories and Parts
• Hitch Step
• Pins and Clips
• InfiniteRule

With this panel kit, you can turn your Kuat Ibex rack into a high-quality truck topper. This makes it easier to carry anything you don't want exposed to the weather.

• Accessories and Parts
• Truck Topper
• Ladder Racks
• Panels
• Kuat

Replaces a front wheel cradle on your Kuat Transfer V2 bike rack. Helps secure and stabilize your bike for travel. Mounting hardware included.

• Accessories and Parts
• Hitch Bike Racks
• Cradle and Arm Parts
• Cradles
• Transfer V2
• Kuat