New Arrivals

This standalone Quick Connect Capture Plate secures onto most Trailair airbag/shock pin boxes (13-3/8" wide), isolating king pin rotation to trigger your SuperGlide hitch's cam-action slide - preventing cab contact during tight turns.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Flex Air pin boxes with skid plates that are 13-1/4" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Mount your Traditional Series PullRite SuperGlide hitch to industry standard base rails or gooseneck mounts using this adapter kit. Works with 4100, 4400, and discontinued 3300 models. Base rails sold separately.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Pullrite

COMING SOON! This winch assist for the Jack-E and Jack-It Pro carrier makes loading and unloading of heavy e-bikes virtually effortless. The hand crank operated winch can lift up to 160 lbs.

• Accessories and Parts
• RV and Camper Bike Racks
• Hitch Bike Racks
• Winch Assist
• Jack-It
• Lets Go Aero

COMING SOON! Easily move your Jack-It Original or Jack-It PLUS bike rack from the trailer A-frame to your vehicle hitch. Detach the V-Wing carrier section and mount it to the adapter on any motorized vehicle for convenient bike transport.

• Accessories and Parts
• RV and Camper Bike Racks
• Shanks and Adapters
• Hitch Shank
• Jack-It
• Lets Go Aero

COMING SOON! The Bump-It receiver adaptor transforms the Jack-It Pro and Jack-It TwinSpin trailer A-frame mounted bike rack models into a mobile solution for the vehicle hitch.

• Accessories and Parts
• RV and Camper Bike Racks
• Shanks and Adapters
• Hitch Shank
• Jack-It
• Lets Go Aero

Need a replacement tank for your Pacbrake setup or looking to size up? This 5-gallon carbon steel tank is powder coated, corrosion-resistant, and built to ASME specs—ready to store air for your suspension or accessories.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Vehicle Suspension
• Air Tank
• Pacbrake

Get the most out of your onboard air system with this handy accessory kit. It includes a 25' curly hose, gauge, and multiple fittings to inflate tires, power small air tools, or check pressure on the go.

• Accessories and Parts
• Air Bag Compressor Kit
• Vehicle Suspension
• On Board Air Compressor
• Air Lines
• Tubing
• Pacbrake

Universal mounting bracket for HP325 Series compressors.

• Accessories and Parts
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• On Board Air Compressor
• Mounting Hardware
• Brackets
• Pacbrake

Need a replacement tank for your Pacbrake setup? This 2-1/2-gallon polished aluminum tank is rustproof and ready to store air for your suspension or accessories.

• Accessories and Parts
• On Board Air Compressor
• Vehicle Suspension
• Tire Inflator
• Air Tank
• Pacbrake

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• On Board Air Compressor
• Remote Control
• Pacbrake

Replaces one air bag for your Pacbrake Alpha HD air suspension kit. Includes one single convoluted air bag with aluminum end caps.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Alpha HD
• Pacbrake

This kit is designed to eliminate interference of the axle breather and the Pacbrake air spring support bracket on 2007 - 2017 Dodge 3500 Cab and Chassis vehicles.

• Accessories and Parts
• Vehicle Suspension
• Axle Breather
• Relocation Kit
• Pacbrake

Replaces the sleeve-style air bag for select Pacbrake air bag suspension kits

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Alpha SD
• Pacbrake

Replace lost or damaged hardware for your MaxxAir MaxxFan Deluxe roof vent fan. Designed for a perfect fit with all MaxxAir MaxxFan Deluxe models.

• Accessories and Parts
• RV Vents and Fans
• Hardware
• MAXXAIR

All it takes is one worn brake to throw your trailer off. Replacing a single ABS brake assembly restores smoother stopping and steadier tracking, so you stay in control on steep grades, in crosswinds, and during sudden traffic stops.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• RH
• 5200 - 7000 lbs
• Brake Assembly
• 12 x 2 Inch Drum
• Lippert

Replace a cracked or faded switch bezel on your Power Gear leveling system with this black/silver trim piece. Snaps in easily for a quick cosmetic fix. Works on select Power Gear RV leveling system control panels.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Controllers
• Control Panel
• Bezel
• Lippert

Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Edge and 2000 series 8' power awnings with a built-in LED strip. Installs more easily than replacing just the fabric.

• Accessories and Parts
• RV Awnings
• Fabric
• 8 Feet Wide
• Extends 7 Feet
• Black Fade
• Lippert

Restore push-button power to your Solera awning with this replacement arm kit featuring matching 69 inch Regal arms, flat-back mounts, top-routed wiring, and a black 12-volt rocker switch - just swap the arms and keep your current fabric and roller.

• Accessories and Parts
• RV Awnings
• Arms
• 69 Inch Long
• Pitch Arms
• Flat Awnings
• Black
• Lippert

A damaged harness can make your RV's leveling system unreliable. This 25' replacement restores electrical connections, helping your jacks work smoothly. Designed for Lippert Level-Up systems, it's a simple fix to get you back to camping.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Wiring Harness
• Lippert

Wish you had a quick way to swap out your batteries? Well, you do now. Easily slide this tray out of your RV so you can monitor, replace, or disconnect your batteries without wasting time rooting around a cluttered or cramped cargo compartment.

• Accessories and Parts
• Battery Boxes
• Battery Trays
• Lippert

Restore your Solera Edge slide-out awning with this full idler side replacement kit. Designed for all Solera Edge toppers, it includes black-finished hardware and wire support components for a secure, like-new installation.

• Accessories and Parts
• RV Awning
• Hardware
• Lippert

Replaces the electric steps, motor, and control unit for your Kwikee 47 Series RV step. Motor and control unit automatically extend and retract the steps when you open and close the door. Wiring pigtail hardwires to your RV's power.

• Accessories and Parts
• RV Steps
• Motors
• Control Module
• Steps
• Lippert

This kit includes the hardware for your Solera 2000 Series or Edge awning. The needed awning roller tubes and fabrics are sold separately. The 58" long arms offer sliding adjustable pitch. The wire is located at the bottom.

• Accessories and Parts
• RV Awnings
• Arms
• Pitch Arms
• Lippert