New Arrivals

You're fueling up before the weekend trip and spot the warped and busted hatch from last season. It's been hanging on, but not by much. Time for a fresh one. You can easily swap it out with 15 minutes and the included installation kit.

• RV Access Doors
• Fuel Hatch
• Square
• Locking
• 8W x 8-1/2T Inch
• Black
• B and B Molders

You're walking around your rig and spot the lower corner of the slide-out. The cap is cracked, so the edge is exposed and there is nothing sealing it from water or road debris. This angled bottom cap fixes it before it becomes a problem.

• RV Slide Out Parts
• Caps and Covers
• Angled Bottom
• Bolt-On
• Black
• B and B Molders

Keep your RV protected and looking new with this direct replacement square cap for your slide-out room. Simple to identify by the square shape with a 3-corner hole pattern, this cap also resists impact and won't fade from the sun.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• White
• B and B Molders

Lightweight, compact water hose made for convenient and easy clean-up outside of your RV. The coiled 15' hose plugs into your water control panel via the 1/4 industrial quick-connect fitting and has a male hose end ideal for a hand sprayer.

• RV Drinking Water Hoses
• 15 Feet Long
• Blue
• B and B Molders

Mounted on the top edge of a corner roof edge, this rain spout helps keep your RV free from black drainage streaks. The 90-degree corner spout directs water from both sides, thanks to open gutter ends that catch water from your roof rails.

• RV Trim
• Gutter Parts
• White
• B and B Molders

Towing a trailer means you can't afford to guess what's behind you. This system puts live views of your bed and trailer on a digital rear view mirror, so you always know what's back there before you change lanes or park.

• Backup Camera
• Backup Camera Systems
• Standard Camera System
• Wireless
• 170 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

You're standing in the hot kitchen, cookin' up a storm, wondering why the air always hits the couch but never the stove. This vent fixes that. It redirects airflow where it matters most. A simple upgrade that puts control in your hands.

• RV Vents and Fans
• Vent
• Ceiling Vent
• No Fan
• Plastic
• White
• B and B Molders

Durable plastic floor vent directly replaces a worn or damaged RV floor register in your RV. Fixed ribs are angled to provide consistent and steady airflow to keep your RV comfortable. Rated for up to 200 lbs per square inch.

• RV Vents and Fans
• Vent
• Floor Vent
• No Fan
• Plastic
• White
• B and B Molders

Refresh your RV's city water inlet with this secure hatch. The plastic check valve inlet has a 1/2" MPT inside water connection. Easily accepts city water pressure to fill your water system. Removable screen filter.

• RV Water Inlets
• City Fill Inlet
• Flush Mount
• 3 Inch Deep
• Plastic
• Plastic
• White
• B and B Molders

Install a new RV gravity fill fresh-water inlet with this recessed dish model. Barbed spout connector fits 1-1/4" or 1-3/8" hose. Built-in vent allows air in and out of your tank for smooth flow via 3/8" tubing (not included).

• RV Water Inlets
• Gravity Fill Inlet
• Recessed Mount
• 3-1/2 Inch Diameter Cutout
• 2-1/2 Inch Deep
• Plastic
• White
• B and B Molders

You're filling the fresh tank before a long weekend and your original water hatch is cracked, loose, and barely hanging on. You know it's time for a new one. This kit has everything you need to swap it out and get ready for the next trip.

• RV Water Inlets
• Gravity Fill Inlet
• Flush Mount
• Plastic
• Gray
• B and B Molders

You're checking the corner of your slide-out and notice the drip pan's missing. Now water's got a direct path to run down the trim and straight into trouble. This right-hand replacement catches the runoff and fits tight to steer it clear.

• RV Slide Out Parts
• Caps and Covers
• Drip Pan
• Bolt-On
• Black
• B and B Molders

Improve the look of your RV's slide-out with this molded plastic cover. The arrow shape adds protection to the corner edge of your slide-out cap. The hooked lip edges of the arrow tip and single screw hole make installing easy.

• RV Slide Out Parts
• Caps and Covers
• Straight Arrow Corner
• Bolt-On
• Black
• B and B Molders

It's stressful keeping track of what's behind your work van on the road or backing out of a crowded loading dock. This digital rear view mirror restores that view and constantly records video, so if anything happens, you've got proof.

• Backup Camera
• Backup Camera Systems
• Standard Camera System
• Hardwired
• 170 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• White
• B and B Molders

Tucked into the wall and sealed up tight, this docking station keeps your hookups organized and out of sight. Flip the door, hook up, and you'refree to kick back - your campsite setup just got way easier.

• RV Water Inlets
• City Fill Inlet
• Recessed Mount
• 3-3/4 Inch Deep
• Plastic
• Black
• B and B Molders

Install this locking multi-purpose hatch on your RV's exterior to create a secure access point. The open-back hatch consists of a mounting flange and main door with 2 small access doors for cables. Locking door with key provides security.

• RV Access Doors
• Multi-Purpose Hatch
• Rectangle
• Locking
• 12-5/8W x 7-3/4T Inch
• 11-1/16W x 6T Inch Cutout
• White
• B and B Molders

Easily adjust warm or cool airflow in your RV to keep comfortable. Use the rotating grille to control directional flow. Simple to install with 2" duct in walls or ceiling with 4-1/8" cutout. Installed grille covers mounting screws.

• RV Vents and Fans
• Vent
• Wall Vent
• Floor Vent
• Ceiling Vent
• No Fan
• Plastic
• Beige
• B and B Molders

You're inspecting the exposed end of the belt rail trim on your slide-out and notice it's missing a cover. That exposed extrusion could snag debris or catch moisture. This left-hand cap has tabs to fit into the trim edge for a finished look.

• RV Slide Out Parts
• Caps and Covers
• Belt Rail Cap
• Bolt-On
• Black
• B and B Molders

Direct water away from your RV with this short gutter spout that drains water away from your RV roof, avoiding those unsightly black streaks. Fits all rain gutter rails up to 1-1/16" wide. Easy to install.

• RV Trim
• Gutter Parts
• White
• B and B Molders

After a long day on the trail, backing up your Jeep with the spare tire in the way can be frustrating. You crane your neck and still can't see. With this camera, you get a clear look at what's behind you on your factory display.

• Backup Camera
• Backup Camera Systems
• Spare Tire Camera System
• Hardwired
• 150 Degrees
• Brandmotion

Keep your RV electrical cables or cords secure with this locking cable hatch. Cable access door lets you have cords out while the door is shut and sits flush when cords aren't in use. Locking door with key provides security.

• RV Access Doors
• Electrical Cable Hatch
• Rectangle
• Locking
• 7-5/8W x 6-1/2T Inch
• 5-7/8W x 4-3/4T Inch Cutout
• Black
• B and B Molders

Update your RV's worn fresh water inlets with this dual-fill panel. Includes a gravity port to fill your fresh-water tank and a threaded plastic check valve for pressurized city water fill. Vent allows air into your tank so water flows smoothly.

• RV Water Inlets
• City Fill Inlet
• Gravity Fill Inlet
• Flush Mount
• 2-1/2 Inch Deep
• Plastic
• Plastic
• Black
• B and B Molders

You're replacing a sun-faded, road-battered, barely sealed access hatch that's been holding on by a thread since your last trip. You pull it off, line up the new one, and it fits. Like it was made for your rig from the start. Because it was.

• RV Access Doors
• Multi-Purpose Hatch
• Rectangle
• Locking
• 12-5/8W x 7-3/4T Inch
• 11-1/16W x 6T Inch Cutout
• White
• B and B Molders