New Arrivals

Replaces the 0.625" hex nut that secures the coupler to your Demco Recon gooseneck to 5th wheel hitch adapter base (DM6021).

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Hardware
• Nuts
• Hex Nut
• Demco

Restore safe towing with this 2" ball coupler for your Demco DA70 actuator. Replaces worn or damaged coupler and bolts directly to the actuator housing.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Coupler Case
• Demco

Replacement 4" x 0.625" full thread Grade 5 bolt for your Demco Recon gooseneck to 5th wheel hitch adapter base (DM6021).

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Hardware
• Bolts
• Demco

Bolt this locking plate onto your Lippert Helux pin box to prevent the king pin from rotating inside your Demco Autoslide fifth-wheel trailer hitch. Hardware included.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Helux
• Demco

Replaces the fuse holder for your Demco Stay-IN-Play Duo (SM99251 or SM99243) or Air Force One (9599007, 9599019, 9599020, or 9599021) supplemental braking system.

• Accessories and Parts
• Flat Tow Brake System
• Fuse Holder
• Demco

Replaces the 2-5/16" coupler for your Demco Recon Gooseneck to 5th wheel hitch adapter base (DM6021). Provides the attachment point for the gooseneck ball in your truck bed.

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Coupler
• Demco

Lost a fender on the road or cracked it backing into a tight spot? This replacement passenger's-side fender assembly gets your Demco KarKaddy SS or KarKaddy 3 tow dolly looking sharp and road-ready again.

• Accessories and Parts
• Trailers
• Tow Dolly Parts
• Fenders
• Demco

Square tube welds onto your trailer. Works with 4" width inner tubes (sold separately). Pairs perfectly with the eZ-Latch gooseneck coupler DM43KV (sold separately).

• Accessories and Parts
• Gooseneck Coupler
• Outer Tube
• Demco

Add extra strength where your Demco cable anchor bolts to the firewall. This steel plate reinforces thin firewalls for Air Force One or Stay-IN-Play Duo installs, keeping the anchor secure.

• Accessories and Parts
• Flat Tow Brake System
• Hardware
• Plates
• Demco SBS

Moving your 5th-wheel hitch to a new truck? This replacement hardware kit lets you reinstall your Demco universal above-bed base rails (DM6701) with all-new bolts, nuts, and washers - giving you a rock-solid fit for safe, confident towing.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Hardware
• Universal
• Demco

Replace the lost or damaged cable anchor in your Demco Stay-in-Play DUO or Air Force One system. Includes set screw to secure the cable in place and restore your systems function.

• Accessories and Parts
• Flat Tow Brake System
• Hardware
• Anchors
• Demco SBS

Replaces a worn or missing ramp bushing on your Demco Kar Kaddy SS tow dolly. This bushing ensures proper spacing, allowing the ramp to tilt up for storage and secure in lowered position for loading.

• Accessories and Parts
• Trailers
• Hardware
• Bushings
• Demco

Replaces the pull pin on the breakaway switch that came with your Demco Air Force One (9599007, 9599019, 9599020, or 9599021) or Stay-IN-Play Duo (SM99251 or SM99243) supplemental braking system.

• Accessories and Parts
• Flat Tow Brake System
• Breakaway Kit
• Switches
• Demco

If you're tired of your trailer brakes locking when you back up, this hand activated reverse lockout stops the surge actuator from applying the brakes. It installs directly on any Demco DA75 actuator with no electrical hookup required.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Reverse Lockout
• Demco

Demco's eZ-Latch coupler latch is now available for your gooseneck trailer! This gooseneck coupler head assembly welds onto the stem of your trailer.

• Accessories and Parts
• Gooseneck Coupler
• Head
• Demco

Your trailer's wired right, but the brakes still won't fire. If your factory controller doesn't recognize your electric-over-hydraulic actuator, this adapter sends the signal it needs so the brakes activate, no rewiring required.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• Adapters
• Deutsche Hydrapro

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Kit helps repair your harness on your Dexter ABS tow system.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• ABS System Wheel Sensor Parts
• Wiring Harness
• Repair Kit
• Dexter Axle

Replaces your wheel sensor on your Dexter ABS tow system.

• Accessories and Parts
• Trailer Brakes
• ABS System Wheel Sensor Parts
• Electric Drum Brakes
• Sensors
• Dexter Axle

This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace the pivot hardware in your Dexter suspension equalizer with this complete OEM kit. Includes bushings, bolts, locknuts, and instructions to restore quiet, reliable performance.

• Accessories and Parts
• Trailer Suspension Parts
• Hardware
• Dexter

Passenger's-side 10" x 2-1/4" hydraulic drum brake assembly features a free-backing design for smooth reversing. Fits 3,500-lb axles with 13" to 15" wheels and mounts with a 4-bolt flange.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 3500 lbs
• Brake Assembly
• 10 x 2-1/4 Inch Drum
• Dexter