New Arrivals

You packed right, now seal the deal. This fitted cover wraps your etrailer cargo carrier in weather-resistant protection, keeping your gear clean, dry, and out of sight. Bungee cords aren't a solution, they're wind chimes for your cargo.

• Accessories and Parts
• RV Cargo Carrier
• Hitch Cargo Carrier
• Cargo Cover
• etrailer

Replaces the manual override cap for your etrailer A-frame electric jack (EJ-3520-WBX). White color to match the housing on your jack.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Caps
• etrailer

Replaces the crank handle on your etrailer scissor jacks (e56VV and e96VV). Handle allows you to manually crank the jacks.

• Accessories and Parts
• Trailer Jack
• Camper Jacks
• Handles and Cranks
• Sidewind
• etrailer

Square tube welds onto your trailer. Works with 4" width inner tubes (sold separately). Pairs perfectly with the eZ-Latch gooseneck coupler DM43KV (sold separately).

• Accessories and Parts
• Gooseneck Coupler
• Outer Tube
• Demco

Add extra strength where your Demco cable anchor bolts to the firewall. This steel plate reinforces thin firewalls for Air Force One or Stay-IN-Play Duo installs, keeping the anchor secure.

• Accessories and Parts
• Flat Tow Brake System
• Hardware
• Plates
• Demco SBS

Replace the lost or damaged cable anchor in your Demco Stay-in-Play DUO or Air Force One system. Includes set screw to secure the cable in place and restore your systems function.

• Accessories and Parts
• Flat Tow Brake System
• Hardware
• Anchors
• Demco SBS

Replaces a worn or missing ramp bushing on your Demco Kar Kaddy SS tow dolly. This bushing ensures proper spacing, allowing the ramp to tilt up for storage and secure in lowered position for loading.

• Accessories and Parts
• Trailers
• Hardware
• Bushings
• Demco

Replaces the pull pin on the breakaway switch that came with your Demco Air Force One (9599007, 9599019, 9599020, or 9599021) or Stay-IN-Play Duo (SM99251 or SM99243) supplemental braking system.

• Accessories and Parts
• Flat Tow Brake System
• Breakaway Kit
• Switches
• Demco

If you're tired of your trailer brakes locking when you back up, this hand activated reverse lockout stops the surge actuator from applying the brakes. It installs directly on any Demco DA75 actuator with no electrical hookup required.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Reverse Lockout
• Demco

Demco's eZ-Latch coupler latch is now available for your gooseneck trailer! This gooseneck coupler head assembly welds onto the stem of your trailer.

• Accessories and Parts
• Gooseneck Coupler
• Head
• Demco

For heavy-duty applications that require cable, this steel winch cable has a break strength of 4,200 lbs and a working load limit of 1,400 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 3/16 Inch Diameter
• 4200 lbs
• Wire Rope
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

Replace a lost or damaged bracket or install one in a second vehicle to easily transfer your Curt NEXT brake controller. The low-profile design installs above or below the dash and includes multiple mounting options for a secure, unobtrusive fit.

• Accessories and Parts
• Trailer Brake Controller
• Mounting Hardware
• Brackets
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 5,600 lbs and a working load limit of 1,865 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 7/32 Inch Diameter
• 5600 lbs
• Wire Rope
• CURT

Replace the lost or damaged center pin for your Curt PowerRide fifth-wheel trailer hitch. Pin secures the 5th wheel head to the hitch body.

• Accessories and Parts
• 5th Wheel Hitch
• Pins and Clips
• CURT

Replaces the short bed bracket for your Curt OEM puck system gooseneck ball kit (C60668 or C60663). Compatible with 2023-2025 GMC Sierra and Chevrolet Silverado trucks with 6.5' short beds.

• Accessories and Parts
• Trailer Hitch Ball
• Mounting Hardware
• Brackets
• CURT

Replacement head assembly works with Blue Ox standard SwayPro weight distribution systems. Includes replacement hardware.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Blue Ox

Restore your Curt TruTrack 2P hitch with this direct replacement head. Built to fit 5,000-lb to 8,000-lb systems only (17599), it keeps your setup towing straight with integrated sway control right where you need it.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• CURT

Worn brake hoses reduce stopping power. This DOT-approved Kodiak hose seals tight for leak-proof braking and resists rust for long-lasting performance. Dead swivel ends prevent twisting during installation. Works with any 3/16" brake lines.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• 4 Feet Long
• Brake Lines
• Brake Line Components
• Kodiak

Replace the spacer on your Kodiak K71-2R-11-10D-DDDD disc brake kit. Designed for 11" rotors with an 8 on 6-1/2" bolt pattern and 5/8" studs, it restores fit and function for your 10,000-lb axle, keeping disc brakes working smoothly.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 10000 lbs
• Rotors
• Rotor Spacers
• Kodiak

Worn brake hoses reduce stopping power. This DOT-approved Kodiak hose seals tight for leak-proof braking and resists rust for long-lasting performance. Dead swivel ends prevent twisting during installation. Works with any 3/16" brake lines.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• 26 Feet Long
• Brake Lines
• Brake Line Components
• Kodiak

Caliper-mounting bracket is designed for use with 11.6" hub-and-rotor assemblies that have an 8 on 6-1/2 bolt pattern and 5/8" wheel bolts. Works with dually applications and mounts on 7-bolt, 10,000-lb Dexter brake flanges.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 10000 lbs
• Hardware
• Caliper Parts
• Mounting Brackets
• Kodiak

Replaces 2 caliper retaining clips and 2 retaining clip bolts on your Kodiak DBC-338-HD calipers.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Bolts
• Kodiak

These snap-in blue inserts add a bold accent to your AM06 trailer wheel. They fit cleanly into the spokes for a custom look without paint or tools. A quick, easy way to give your trailer a more personalized, standout appearance.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Wheel Trim
• Color Inserts
• Blue
• Kenda