New Arrivals
Bumper Case for CTEK Battery Chargers - 3.8 Amp to 5 Amp
In Stock
You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.
- Accessories and Parts
- Battery Charger
- Cases
- CTEK Power Inc
Bumper Case for CTEK Battery Chargers - 0.8 Amp
In Stock
You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.
- Accessories and Parts
- Battery Charger
- Cases
- CTEK Power Inc
Bumper Case for CTEK Battery Chargers - 7 Amp
In Stock
You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.
- Accessories and Parts
- Battery Charger
- Cases
- CTEK Power Inc
CTEK Trolley Pro Battery Charging and Testing Station
In a busy workshop, efficiency is key. The Trolley Pro keeps your chargers, laptops, and testing equipment organized and mobile, so you can move seamlessly between tasks without missing a beat. Make sure your essential tools are always within reach.
- Accessories and Parts
- Battery Charger
- Workstation
- Smart Charge
- CTEK Power Inc
Storage Case for CTEK CS Free Portable Battery Charger
In Stock
You invested in the CS Free to keep you powered up - now protect it. This case keeps your charger safe and organized. With a water-resistant design and padded interior, it ensures your charger and accessories stay secure wherever the road takes you.
- Accessories and Parts
- Battery Charger
- Portable Chargers
- Cases
- CTEK Power Inc
COMEUP BossHook Forged Steel Winch Hook - Flush Mount w/ Fairlead Pad - 31,967 lbs - Large
The BossHook is a forged steel recovery hook built to take abuse. It mounts flush so it won't rattle or beat up your fairlead, and it's rated at 31,967 lbs, so it's plenty strong for the rough recoveries you may run into.
- Accessories and Parts
- Electric Winch
- Hooks
- Hook w Clasp
- ComeUp
Replacement 12V Motor for ComeUp DV-18 and STS-1501 Winches - 7.0 HP
In Stock
Replaces the 7.0 hp motor for your 12V ComeUp winch. Fits with DV-18, STS-15010, and STS-15012 winches.
- Accessories and Parts
- Electric Winch
- Motor
- ComeUp
Dexter Hydraulic Drum Brake Assembly w/ Parking Brake Lever - Duo Servo - 12-1/4" - Left Hand
In Stock
This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 10000 lbs
- 9000 lbs
- Brake Assembly
- 12-1/4 x 3-3/8 Inch Drum
- Dexter
Fortress Aluminum Threaded Cap Service Kit for 9-10K lb Dexter Axles
Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Service Kit
- Dexter
Harness Repair Kit for Dexter Tow Assist ABS System
In Stock
Kit helps repair your harness on your Dexter ABS tow system.
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- ABS System Wheel Sensor Parts
- Wiring Harness
- Repair Kit
- Dexter Axle
Replacement Wheel Speed Sensor for Dexter Tow Assist System
In Stock
Replaces your wheel sensor on your Dexter ABS tow system.
- Accessories and Parts
- Trailer Brakes
- ABS System Wheel Sensor Parts
- Electric Drum Brakes
- Sensors
- Dexter Axle
Replacement Inner Member Dexter A84 Actuator - Triple Axle w/Disc Brakes - 2-5/16" Ball - 8.4K
This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Inner Member
- Dexter
Replacement Dexter Axle 3-1/2" x 5/8"-18 Press-In Wheel Stud - Qty 1
In Stock
Replaces (1) 3-1/2" x 5/8"-18 Dexter Axle press-in wheel stud for 8K to 12K disc brakes or idler hubs with 5/8" studs.
- Accessories and Parts
- Trailer Hubs and Drums
- Boat Trailer Wheels
- Trailer Tires and Wheels
- Wheel Studs
- 5/8 Inch Diameter
- Drive-In Stud
- Dexter
Fortress Aluminum Threaded Cap Service Kit for 10K to 16K lb AL-KO and Rockwell Axles
Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Service Kit
- Dexter
Replacement Pivot Bushing Hardware Kit for Dexter Suspension Equalizers
Replace the pivot hardware in your Dexter suspension equalizer with this complete OEM kit. Includes bushings, bolts, locknuts, and instructions to restore quiet, reliable performance.
- Accessories and Parts
- Trailer Suspension Parts
- Hardware
- Dexter
Dexter Hydraulic Drum Brake Assembly - Free-Backing - 10" - Right Hand - 3,500 lbs
Passenger's-side 10" x 2-1/4" hydraulic drum brake assembly features a free-backing design for smooth reversing. Fits 3,500-lb axles with 13" to 15" wheels and mounts with a 4-bolt flange.
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- 10 x 2-1/4 Inch Drum
- Dexter
Replacement Cap for Dexter 12V KTI Hydraulic Pump Reservoirs - Qty 1
Replaces the cap for your Dexter 12V KTI hydraulic pump reservoir. Fits DC-4419 and DC45520.
- Accessories and Parts
- Dump Trailer Parts
- Hydraulic Pumps
- Caps
- Dexter Axle
Reverse Lockout Solenoid for Dexter and Tie Down Hydraulic Brake Actuators
Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Solenoid
- Dexter
Dexter Hydraulic Drum Brake Assembly w/ Parking Brake Lever - Duo Servo - 12-1/4" - Right Hand
In Stock
This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 10000 lbs
- 9000 lbs
- Brake Assembly
- 12-1/4 x 3-3/8 Inch Drum
- Dexter
Fortress Aluminum Threaded Cap Service Kit for 10K to 15K lb Dexter Axles
In Stock
Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Service Kit
- Dexter
Replacement Copper Crush Washer for Dexter Disc Brake Calipers - 7/16" Inner Diameter
Replace a worn or leaking copper washer on your Dexter disc brake caliper. This 7/16" crush washer provides a tight, reliable seal between the banjo fitting and caliper to help prevent brake fluid leaks in your hydraulic braking system.
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Hardware
- Caliper Parts
- Washers
- Dexter
Dexter Hydraulic Drum Brake Assembly - Free-Backing - 10" - Left Hand - 3,500 lbs
Driver's-side 10" x 2-1/4" hydraulic drum brake assembly features a free-backing design for smooth reversing. Fits 3,500-lb axles with 13" to 15" wheels and mounts with a 4-bolt flange.
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- 10 x 2-1/4 Inch Drum
- Dexter
Replacement Inner Member for Dexter XR84 Actuator - Triple Axle w/ Disc - 2" Ball - 8.4K
This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Inner Member
- Dexter
Replacement Cap for Dexter Single Hydraulic Jack Add-On w/ Selector Valve 12,000 lbs
Replaces the protective top cap on Dexter 12,000-lb hydraulic jack add-on with selector valve; keeps internal components shielded from debris and moisture.
- Accessories and Parts
- Trailer Jack
- Electric Winch
- Caps
- Dexter