New Arrivals

This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with single or double-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Replace the worn or damaged latch on your Dexter A-84 or A-160 actuator with this direct replacement kit. Includes latch assembly and hardware to restore secure and reliable trailer hookup.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Hydraulic Drum Brakes
• Disc Brakes
• Latch
• Dexter

Replacement Trailer Grease Cap Plugs for E-Z Lube Grease Caps

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Plugs
• Dexter

Upgrade your boat trailer's braking power with this rust-resistant GalvX disc brake. Kit includes 1 pre-greased hub, inner (L68149) and outer (L44649) bearings, rotor, caliper, mounting brackets, and lug nuts.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• RH
• LH
• 3500 lbs
• Brake Assembly
• Hub and Rotor Assembly
• Dexter

Replaces the shoe and roller for your passenger's-side Dexter 15,000-lb 12-1/4" x 5" air brake.

• Accessories and Parts
• Trailer Brakes
• Brake Shoes
• Dexter

Your Fortress bolt-on cap has been holding it together - now it's time to return the favor. This service kit gives your Fortress cap fresh gaskets, oil fill plugs, and hardware it needs to stay leak-free and pressure tight.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

This replacement inner member slide fits into the existing outer member housing of your Dexter or Tie Down surge brake actuator. Fits actuator models LP80, LP85, and LP8500.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• Inner Member
• Dexter

Replace worn or leaking copper washers on your Dexter disc brake caliper. These 7/16" crush washers provide a tight, reliable seal between the banjo fittings and calipers to help prevent brake fluid leaks in your hydraulic braking system.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Hardware
• Washers
• Dexter

You packed right, now seal the deal. This fitted cover wraps your etrailer cargo carrier in weather-resistant protection, keeping your gear clean, dry, and out of sight. Bungee cords aren't a solution, they're wind chimes for your cargo.

• Accessories and Parts
• RV Cargo Carrier
• Hitch Cargo Carrier
• Cargo Cover
• etrailer

Replaces the manual override cap for your etrailer A-frame electric jack (EJ-3520-WBX). White color to match the housing on your jack.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Caps
• etrailer

Replaces the crank handle on your etrailer scissor jacks (e56VV and e96VV). Handle allows you to manually crank the jacks.

• Accessories and Parts
• Trailer Jack
• Camper Jacks
• Handles and Cranks
• Sidewind
• etrailer

Restore full function to your Bedlocker cover with this electro-magnetic brake. Designed to stop and lock the cover anywhere along the rails, just like the original on all Pace-Edwards Bedlocker electric tonneaus.

• Accessories and Parts
• Tonneau Cover
• Locks
• Pace Edwards BedLocker
• Pace Edwards

Replaces the T-slotted rails for your Pace Edwards Bedlocker Explorer Series hard tonneau cover (311-BEFA05A28).

• Accessories and Parts
• Tonneau Cover
• Rails
• Pace Edwards BedLocker
• Pace Edwards

This flange retrofits 3/4" diameter clearance/marker lights to fit in 2" and 2-1/2" mounting holes.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• Peterson

Plug in Peterson LED lights fast with this AMP-style pigtail. Blunt-cut leads give you wiring flexibility, and the 7-3/4" length makes routing easy. Seals tight for a weather-resistant connection you can trust on every haul.

• Accessories and Parts
• Trailer Lights
• Wiring
• Plugs and Pigtails
• Two Wire
• Straight Pigtail
• Peterson

This bracket mounts your light to the surface of your trailer.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• Peterson

This sticker brings you into compliance with NHTSA requirements for labeling ABS malfunction lamps.

• Accessories and Parts
• Trailer Lights
• Labels
• Peterson

Use this grommet to mount 2-1/2" round trailer lights. It's designed with a closed back to protect the connection from moisture and corrosion. Fits in 2-3/4" diameter cutout.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• 2-3/4 In Diameter
• Grommet
• Round
• Peterson

Mount your 2" trailer light using this grommet.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• 2-3/4 In Diameter
• Grommet
• Round
• Peterson

Mount your 3/4" trailer light using this grommet.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• 1 Inch Diameter
• Grommet
• Round
• Peterson

Bring your trailer project to life with P&F Products aluminum square tube. With this tube, you can build a ladder rack or frame that is sturdy, rust resistant, and custom fit for your needs.

• Accessories and Parts
• Ladder Racks
• Tubes
• P&F Products

Replaces a ladder rack bar for your P&F ladder rack. Includes hardware.

• Accessories and Parts
• Ladder Racks
• Crossbars
• P&F Products

Build a ladder rack or frame for your enclosed trailer with P&F Products aluminum square tube. This rustproof tubing is easy to cut to size and delivers strong, lasting support for your custom project.

• Accessories and Parts
• Ladder Racks
• Tubes
• P&F Products

Replaces a ladder rack bar for your P&F ladder rack. Includes hardware.

• Accessories and Parts
• Ladder Racks
• Crossbars
• P&F Products