New Arrivals

This kit is designed to eliminate interference of the axle breather and the Pacbrake air spring support bracket on 2007 - 2017 Dodge 3500 Cab and Chassis vehicles.

• Accessories and Parts
• Vehicle Suspension
• Axle Breather
• Relocation Kit
• Pacbrake

Replaces the sleeve-style air bag for select Pacbrake air bag suspension kits

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Alpha SD
• Pacbrake

Replaces the HP425 Series air compressor for you Pacbrake onboard air system or air suspension system. This 12V unit has a black finish and comes with installation hardware.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Air Bag Compressor Kit
• Vehicle Suspension
• Air Compressor
• Pacbrake

Waiting on your compressor to catch up? Add this 2-1/2 gallon tank to store air and speed up your system. You'll get quicker response from your air springs or tools, plus fewer compressor cycles and smoother control when it counts.

• Accessories and Parts
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Vehicle Suspension
• Air Tank
• Pacbrake

Replaces one air bag for your Pacbrake Alpha HD Pro air suspension kit. Includes one double convoluted air bag with internal jounces and aluminum end caps.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Alpha HD
• Pacbrake

This kit was designed specifically for 2017-2026 Ford F-250/F-350/F-450 Super Duty vehicles that are equipped with a rear sway bar or camper package to utilize a Pacbrake HP10677 / HP10677-J / HP10677-X / HP10677-X-J Air Spring kit (sold separately).

• Accessories and Parts
• Vehicle Suspension
• Retrofit Kit
• Pacbrake

Using your 12V HP625 compressor with an air tank? You'll need this unloader kit if you're piecing together your own onboard air setup. It protects your system from pressure backfeed and keeps things cycling smoothly.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Vehicle Suspension
• Unloader Assembly
• Pacbrake

Tired of uneven loads or stiff rides? This tankless control kit lets you fine-tune each air spring from the cab with dual paddle valves, a chrome compressor, and easy-read gauges, so your truck rides right, every time.

• Accessories and Parts
• Air Bag Compressor Kit
• On Board Air Compressor
• Vehicle Suspension
• Air Compressor System
• 220 psi
• Wired Control
• Dual Path
• Pacbrake

You just hooked up the trailer and the truck's not level. Climbing in and out of the cab to adjust your air bags isn't cutting it. This wireless controller gives you full control from where you stand—no matter what springs you use.

• Accessories and Parts
• Air Bag Compressor Kit
• Smartphone App
• Single Path
• Smartphone Display
• Extreme Duty
• Pacbrake

Looking for simple, in-cab control of your air springs? This basic paddle valve kit connects to your existing air system and lets you inflate or deflate each spring independently with dual paddles and a built-in digital gauge.

• Air Bag Compressor Kit
• Accessories and Parts
• In-Cab Gauge
• Dual Path
• Digital Display
• Pacbrake

Restores full control and monitoring of your Progressive Dynamics PD1600 Series RV inverter. Compatible with models PD1660, PD1670, and PD1680. Gives you back your access to your inverter without having to actually access the inverter.

• Accessories and Parts
• RV Power Inverter
• Remote Control
• Progressive Dynamics

This AC/DC distribution panel keeps your power systems easily accessible inside the RV. Provides space for up to 9 AC branch circuits and up to 12 fused DC branch circuits. 12 VDC input power terminal creates a connection point for battery/converter.

• Accessories and Parts
• RV Power Converter
• AC/DC Distribution Panel
• Progressive Dynamics

This replacement cable plugs into your Progressive Dynamics PD1600 series inverter panel (PD46MR) to restore full control and monitoring from up to 25 feet.

• Accessories and Parts
• RV Power Inverter
• Cables
• Progressive Dynamics

Replaces the rail clamps needed to secure your Pace Edwards UltraGroove Metal retractable hard tonneau cover (311-KRFA07A30). Includes clamps and mounting hardware.

• Accessories and Parts
• Tonneau Cover
• Clamps
• Pace Edwards UltraGroove
• Pace Edwards

Replaces the cover for your Pace Edwards JackRabbit truck bed cover (TR2032 and JRC3250). Rails and canister sold separately.

• Accessories and Parts
• Tonneau Cover
• Tarps
• Pace Edwards JackRabbit
• Pace Edwards

Replacing a damaged Switchblade cover? This metal replacement slat cover with vinyl overlay restores the sleek look and dependable protection of your Pace Edwards Switchblade or Switchblade Metal. Reuse your original rails, canister, and hardware.

• Accessories and Parts
• Tonneau Cover
• Tarps
• Pace Edwards SwitchBlade
• Pace Edwards

This kit upgrades your Pace Edwards tonneau cover rail clamps so you can add a kickstand (sold separately).

• Accessories and Parts
• Tonneau Cover
• Kickstand
• Pace Edwards BedLocker
• Pace Edwards SwitchBlade
• Pace Edwards JackRabbit
• Pace Edwards

Replaces the cover for your Pace Edwards JackRabbit hard tonneau cover (JRT3554).

• Accessories and Parts
• Tonneau Cover
• Tarps
• Pace Edwards JackRabbit
• Pace Edwards

Replaces a fabric panel for your Pace Edwards JackRabbit hard, retractable tonneau cover (JRFA18A44 and JEFA18A44).

• Accessories and Parts
• Tonneau Cover
• Panels
• Pace Edwards JackRabbit
• Pace Edwards

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Rota-Flex pin boxes with skid plates that are 13-5/8" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This fits Lippert Rhino Box pin boxes with skid plates that are 7-3/8" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Rhino Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required to tow with the SuperGlide. This plate fits Lippert 1621, 1116, and 1716 pin boxes with 13-1/4" wide skid plates.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

This adapter attaches to the factory, underbed fifth wheel towing prep package receivers in your vehicle. The base provides the attachment point for your 5th-wheel hitch with industry standard tabbed feet. Modular design allows for easy removal.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Custom
• Pullrite

This adapter attaches to the factory, underbed 5th-wheel prep package receivers in your vehicle so that you can use your PullRite SuperGlide hitch that normally attaches to industry-standard rails (2700 or 2900).

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Custom
• Pullrite