New Arrivals

Grade 8 wheel stud fits DeeMaxx 13" hub-and-rotor assemblies, but its standard 9/16"-18 thread size will fit other hub assemblies just as well.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Hubs and Drums
• Trailer Tires and Wheels
• Wheel Studs
• 9/16 Inch Diameter
• Drive-In Stud
• DeeMaxx

Need a tough, reliable connection from your caliper to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Disc Brakes
• Hydraulic Drum Brakes
• 4 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

Replaces the caliper-mounting bracket for you a 10-16K Dexter/Lippert dual wheel axle, fits 11" rotor with 7 bolt flange.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 16000 lbs
• Caliper Parts
• Hardware
• Mounting Brackets
• DeeMaxx

Need a tough, reliable connection from your actuator to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Trailer Brakes
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• 6 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

This 23' hose gives you the length to run a brake line from your actuator to the axle on longer trailers. The extra reach lets you make a full connection without adding couplers or mid-line fittings.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Hydraulic Drum Brakes
• Disc Brakes
• 23-1/3 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

This stainless steel acorn lug nut laughs in the face of rust. Perfect for saltwater use, it stays strong and rust-free. No chipping, no peeling, just a tough, reliable fit that shrugs off moisture, salt, and road grime for the long haul.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Golf Cart Tires and Wheels
• Wheel Lug Nut
• 5/8 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Stainless Steel
• DeeMaxx

Replaces the mounting hardware for your Curt 70129 tow bar base plate. Restores secure fit on Jeep Gladiator JT.

• Accessories and Parts
• Tow Bar Base Plate
• Hardware
• CURT

Replaces the heavy-duty L-pins and clips from your Curt TruTrack 2P trunnion weight distribution system with integrated active sway control (17355) or support brackets (17517, 17518, and 17519).

• Accessories and Parts
• Weight Distribution Hitch
• Pins and Clips
• CURT

Replaces the spring bar for your Curt TruTrack 4P trailer-mounted weight distribution system (17520).

• Accessories and Parts
• Weight Distribution Hitch
• Spring Bars
• Square Bar
• CURT

Replace a lost or damaged bracket or install one in a second vehicle to easily transfer your Curt NEXT brake controller. The low-profile design installs above or below the dash and includes multiple mounting options for a secure, unobtrusive fit.

• Accessories and Parts
• Trailer Brake Controller
• Mounting Hardware
• Brackets
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 5,600 lbs and a working load limit of 1,865 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 7/32 Inch Diameter
• 5600 lbs
• Wire Rope
• CURT

For heavy-duty applications, this strap has a break strength of 4,800 lbs and a working load limit of 1,600 lbs.

• Accessories and Parts
• Trailer Winch
• Cables and Straps
• 22-3/8 Inch Wide
• 1600 lbs
• Straps
• CURT

Replace a damaged or worn spring bar on your Curt TruTrack 2P system with this forged steel bar. Designed for 5,000-lb to 8,000-lb setups only (17599). Restores sway control and load leveling for safer, more stable towing.

• Accessories and Parts
• Weight Distribution Hitch
• Spring Bars
• Sqaure Bar
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your controller and then plug the other end into the built-in port beneath your vehicle's dash.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

Replace the lost or damaged center pin for your Curt PowerRide fifth-wheel trailer hitch. Pin secures the 5th wheel head to the hitch body.

• Accessories and Parts
• 5th Wheel Hitch
• Pins and Clips
• CURT

Replaces the short bed bracket for your Curt OEM puck system gooseneck ball kit (C60668 or C60663). Compatible with 2023-2025 GMC Sierra and Chevrolet Silverado trucks with 6.5' short beds.

• Accessories and Parts
• Trailer Hitch Ball
• Mounting Hardware
• Brackets
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

Restore your Curt TruTrack 2P hitch with this direct replacement head. Built to fit 5,000-lb to 8,000-lb systems only (17599), it keeps your setup towing straight with integrated sway control right where you need it.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• CURT

Worn brake hoses reduce stopping power. This DOT-approved Kodiak hose seals tight for leak-proof braking and resists rust for long-lasting performance. Dead swivel ends prevent twisting during installation. Works with any 3/16" brake lines.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• 4 Feet Long
• Brake Lines
• Brake Line Components
• Kodiak

Replace the spacer on your Kodiak K71-2R-11-10D-DDDD disc brake kit. Designed for 11" rotors with an 8 on 6-1/2" bolt pattern and 5/8" studs, it restores fit and function for your 10,000-lb axle, keeping disc brakes working smoothly.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 10000 lbs
• Rotors
• Rotor Spacers
• Kodiak

Worn brake hoses reduce stopping power. This DOT-approved Kodiak hose seals tight for leak-proof braking and resists rust for long-lasting performance. Dead swivel ends prevent twisting during installation. Works with any 3/16" brake lines.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• 26 Feet Long
• Brake Lines
• Brake Line Components
• Kodiak

Caliper-mounting bracket is designed for use with 11.6" hub-and-rotor assemblies that have an 8 on 6-1/2 bolt pattern and 5/8" wheel bolts. Works with dually applications and mounts on 7-bolt, 10,000-lb Dexter brake flanges.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 10000 lbs
• Hardware
• Caliper Parts
• Mounting Brackets
• Kodiak

Replaces 2 caliper retaining clips and 2 retaining clip bolts on your Kodiak DBC-338-HD calipers.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Bolts
• Kodiak

These snap-in blue inserts add a bold accent to your AM06 trailer wheel. They fit cleanly into the spokes for a custom look without paint or tools. A quick, easy way to give your trailer a more personalized, standout appearance.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Wheel Trim
• Color Inserts
• Blue
• Kenda